help quick front leave spring question

Started by 83yota5960, February 04, 2010, 09:47:21 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

83yota5960

February 04, 2010, 09:47:21 PM
so im putting marlin front 5inch springs on my 83 toy pu i would want to use the front spring hanger kit from marlin to fit them right.
83 short bed yota 35's 5.29's 4.7 f-150's arb front aussie locker rear high steer ifs rear axle
83 short bed yota 31 a/t mild lift welded ifs rear axle
99 audi A4 as my new daily driver.

Goldrush

#1
February 04, 2010, 09:51:13 PM
sure or you could just use a regular spring hanger
-Zack- aka uncle Zack!                GOT MARLIN?

_______________________________________________
|___[||||||||||][|||T O Y O T A|||][||||||||||]____|
|___[||||||||||][|||||||||][|||||||||][||||||||||]____|

79coyotefrg

#2
February 05, 2010, 08:02:20 AM
was there a question in there :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

-Jake-

#3
February 05, 2010, 09:13:02 AM
Quote from: 83yota5960 on February 04, 2010, 09:47:21 PM
so im putting marlin front 5inch springs on my 83 toy pu i would want to use the front spring hanger kit from marlin to fit them right.

I bet what he meant to say was:  

so im putting marlin front 5inch springs on my 83 toy pu would I want to use the front spring hanger kit from marlin to fit them right?
81 Hilux, E-Lockers, 5.29s, Duals, 30 spline Longfields, 8274 Warn, 40" Iroks, F150s and RUF

Dooner

#4
February 05, 2010, 09:32:58 AM
I think I would just use the factory spring hangers unless they are damaged in some way
"Project Land Cruzah" In Land Cruiser Section
71 FJ40 327/465/ 4.7 Mini T/c, Trussed, Armored Mini Axles w/ High Cross Over, Aussie Lockers & 30 spline Longs.  p/s 35's, SOA, , .  86 Burb D-60 14 bolt 350/400/205 37's.  02 F350 Tow Barge, Toyo 38's, Banks 5" Wicked wheel turbo, Edge Juice w/ Attitude, Blah Blah Blah

germ

#6
February 05, 2010, 02:13:48 PM
 :popcorn:
* Regardless of what happens, someone will find a way to take it too seriously.
* 2% rule: Must be 2% smarter than what your working on.
* If you make something even a fool can use, only a fool will use it.
* I've been crapping in the woods longer than lil'buddy has been alive!

83yota5960

#7
February 05, 2010, 07:35:22 PM
Sorry didnt catch my typing air i am putting 5inh marlin springs in the front. i have to use the front spring hanger from marlin to fit them right cause they are a little longer then stock.
83 short bed yota 35's 5.29's 4.7 f-150's arb front aussie locker rear high steer ifs rear axle
83 short bed yota 31 a/t mild lift welded ifs rear axle
99 audi A4 as my new daily driver.

-Jake-

#8
February 05, 2010, 08:01:22 PM
I have the stock hanger on mine with the rear springs in the front.  Which if I am guessing are the same length as Marlin's springs.  :biggthumpup:
81 Hilux, E-Lockers, 5.29s, Duals, 30 spline Longfields, 8274 Warn, 40" Iroks, F150s and RUF
Print
Go Up Pages1
User actions