Topic: Early 22R Cylinder Head

[91 super yoda]

I dont know exactly what year model but I do know it is an early 22R head. It has been rebuilt by a shop here in Dallas. I would consider a trade for a late model 22RE head.

$100 or trade for late model head

located in Dallas

[91 super yoda [OP]]

http://i889.photobucket.com/albums/ac93/91superyoda/head3.jpg
http://i889.photobucket.com/albums/ac93/91superyoda/head2.jpg
http://i889.photobucket.com/albums/ac93/91superyoda/head.jpg

[t_main_99]

Hi, a few questions:
-Was the head pressure tested for cracks?
-was the deck surfaced?
-Were the valves and guides replaced?
-Any stripped threads or broken bolts?

What would shipping be to 98011 (Seattle area)?

Thanks!

[91 super yoda [OP]]

Hi, a few questions:
-Was the head pressure tested for cracks?
-was the deck surfaced?
-Were the valves and guides replaced?
-Any stripped threads or broken bolts?

What would shipping be to 98011 (Seattle area)?

Thanks!

Yes, it was pressure tested, and decked. The valves and guides were only replaced if they were worn, the threads on the fuel pump block off plate were stripped, one was fixed by the shop, the other I fixed with a steel thread insert held in with loctite, the holes still accept an m8x1.25 bolt.

Ill do $125 shipped, but I have one other guy coming to look at it this weekend.

Thanks
Randy

[t_main_99]

Okay, do you know roughly what year it is? I have an '84 22R (carburated) that I'd like to use it for.

[91 super yoda [OP]]

I think its an 84, but im not an 100% sure.

[83 Crawler]

off topic but my cousin is going to SFA

[t_main_99]

I'm interested in the cylinder head, but would like to be sure it'll work on my block. Let me see if I can count the number of intake bolts - I think that's one of the differences between earlier and newer 22R heads. Assuming that the guy that's looking at it this weekend doesn't take it before then.

[91 super yoda [OP]]

Its still up for sale, there are 10 head bolts but they are the same for early and late models. The difference is in the thickness of the head and the shape of the intake/exhaust ports.

[JoeShmo65]

that head will work on any 22r or 20r motor 1980-1990 but if u put it on a 20r block ill lower ur compression, im interested but wont have the money for bout a week to two weeks so ill check back when i have it, good lookin head tho

[crazykooter]

It will work on any 22r 79-83 for smog reasons.  The thickness diff in the head  makes it so it WONT work on a 22re block since they are shorter. Meaning you wont get a timing chain to work unless you have a link removed.

[91 super yoda [OP]]

top