Author Topic: what is this on my rear end? (Read 4819 times)

hacksaw · « **on:** Nov 27, 2004, 12:44:45 PM »

I have been trying to find out the purpose of the long skiny lever attached from the rear end housing to like a break valve? I can't find this information anywhere. Do I even need it? Thanks

Mike D · « **Reply #1 on:** Nov 27, 2004, 12:49:39 PM »

E-brake lever? does it have a cable running from it?

hacksaw · « **Reply #2 on:** Nov 27, 2004, 12:52:51 PM »

no, this is attached to a bracket on the left side of the housing and has a skiny long lever that goes up and into a brake valve of some sort located on the pass side frame right above the rear end.

hacksaw · « **Reply #3 on:** Nov 27, 2004, 12:55:22 PM »

ebrake cable and such run paralell along the top of the housing and into a bracket that has the long cable that runs to the front of the cab.

Prismo · « **Reply #4 on:** Nov 27, 2004, 01:18:33 PM »

It is called an LSPV by Toyota (I think anyway). It is a proportioning valve for the brakes. It proportions brake to the rear by how much the rear of the truck raises during braking

KYOTA · « **Reply #5 on:** Nov 27, 2004, 01:22:30 PM »

Its the load sensing proportioning valve (LSPV) its a valve that adjusts the rear brakes depending on how much weight is in the back. The bigger the load the higher the arm will raise and apply more braking to the rear

edit: prismo beat me to it

79coyotefrg · « **Reply #6 on:** Nov 27, 2004, 05:05:56 PM »

yea you probably should keep it, just remember if you lift the truck 3 inches, you have to adjust it accordingly,

79coyotefrg · « **Reply #7 on:** Nov 27, 2004, 05:08:09 PM »

you know when i read the title of this thread, i was REALLY hoping he was talking about the rear axle of his truck, had bad thoughts of a boil on a butt or hemorroid or something

KYOTA · « **Reply #8 on:** Nov 27, 2004, 05:16:22 PM »

When I did my truck I just removed the LSPV , and bolted xtended flexible line to the hard line that went to it. I wasnt sure if the brakes would be proportioned correctly front to rear but they are and works awesome.

79coyotefrg · « **Reply #9 on:** Nov 27, 2004, 05:20:25 PM »

yea i threw mine away so long ago i dont remember

might need to put one back on when i do the full float thing

KYOTA · « **Reply #10 on:** Nov 27, 2004, 05:22:59 PM »

Ya I dont know why people will leave them on tied in the 'up' position instead of just shitcanning them

79coyotefrg · « **Reply #11 on:** Nov 27, 2004, 05:25:57 PM »

beats me, my lspv is still there but completely bypassed, havent a clue where the rod is

mudguts · « **Reply #12 on:** Nov 27, 2004, 05:30:08 PM »

warts

dirtbag · « **Reply #13 on:** Nov 27, 2004, 05:31:44 PM »

Quote from: Muddy Nuts on Nov 27, 2004, 05:30:08 PM

warts

ingrown hairs?

MagPede · « **Reply #14 on:** Nov 27, 2004, 05:37:09 PM »

KYOTA · « **Reply #15 on:** Nov 27, 2004, 05:56:56 PM »

Quote from: Muddy Nuts on Nov 27, 2004, 05:30:08 PM

warts

WTF

WHITE_TRASH · « **Reply #16 on:** Nov 27, 2004, 05:59:59 PM »

Its a sad day when the busiest thread on the board is about someone's rear end......

KYOTA · « **Reply #17 on:** Nov 27, 2004, 06:04:17 PM »

no

this place has been dead all weekend so might as well jack this poor guys thread, sorry dood

WHITE_TRASH · « **Reply #18 on:** Nov 27, 2004, 06:17:05 PM »

Yea what the hell eh'. maybe I should turn this into my new buildup thread. then.

79coyotefrg · « **Reply #19 on:** Nov 27, 2004, 06:19:04 PM »

mudguts · « **Reply #20 on:** Nov 27, 2004, 06:20:56 PM »

Sorry for what I started hacksaw
I'll add a point to your score fer ya $Beer Chug\'n$

79coyotefrg · « **Reply #21 on:** Nov 27, 2004, 06:21:35 PM »

come on guys vote in the poll so chris will get this going
http://board.marlincrawler.com/index.php?topic=964.new;topicseen#new

KYOTA · « **Reply #22 on:** Nov 27, 2004, 06:23:10 PM »

Its been a while since weve had a good 'ol fashioned thread jack (except for swampys daily posts) so did every body recover from the big stuffing thursday?

Prismo · « **Reply #23 on:** Nov 27, 2004, 06:25:14 PM »

You guys must be real bored if you are flocking to a thread dealing with a boil on a guys butt.

WHITE_TRASH · « **Reply #24 on:** Nov 27, 2004, 06:28:11 PM »

I had one small plate of grub beings when Im really tired I dont eat much so yea I recovered just fine.

KYOTA · « **Reply #25 on:** Nov 27, 2004, 06:31:44 PM »

I only had firsts this year and was full, got stroked out of pie, mom fogot to sweeten the pumkin pie

it was a little odd but I got a kick ass chocolate cake yesterday to make up for it

hacksaw · « **Reply #26 on:** Nov 27, 2004, 07:28:27 PM »

Ok, I guess I did deserve this?

? And for the record, the Trailmaster 3" body lift kit comes with all the extended brackets to move stuff like my A_ _ problem 3" northward, along with bumper brackets, body skirts, break line brackets, ect... No need to change anything. Just bolt everything back on and there you have it! Ha, I do have a big scar on my left cheek from a go-cart accident several years back. Does that count for this new modified topic??? Thanks for all the help guysssssssssssssssss

Prismo · « **Reply #27 on:** Nov 27, 2004, 07:33:17 PM »

None of this is directed towars you at all. I think everyone is in a holiday mood

hacksaw · « **Reply #28 on:** Nov 27, 2004, 07:35:15 PM »

true dat' we all good here!!! I got a laugh out of it and learned what my question was all about... I am glad everybody had fun with it.

79coyotefrg · « **Reply #29 on:** Nov 28, 2004, 08:42:32 AM »

we need

hacksaw [OP]

hacksaw [OP]

hacksaw [OP]

hacksaw [OP]

Related Topics