Topic: Parts Needed Nor Cal

[Sparkplug]

Like title says, there are a few parts that I am looking for.

I need a 79-85 rear axle complete.
Functioning 22r carb
Good front springs (pref stock)
Nice bench seat (pref 60/40)
32-35 inch tires (at least 30% tread)
Chevy Springs

I have cash and parts to barter with. I have tcases, 2 heads, 4cyl aussie locker, and other misc parts. Cash also. Im close to chico and redding. Thanks

[Moit88RNR]

hey. i have an 80' rear axle, a 4.10 third, stock front springs and (2) 33x12.5x15  M/T Baja Claws 60% on stock chrome steel wheels. i have the other two wheels if you would want them also. the third is super tight, no slop and there is no major wear. i could do all that for $220. i live up in Weed but go down to Redding a couple times a month.

[Sparkplug [OP]]

Is rear axle and third together, or in seperate pieces? What shape are the front springs in? Do they have arch left still? Thanks

[Moit88RNR]

the third and axle are seperated right now. the third is out of a 88 runner. ill try to find some pics of the springs under a truck

[Moit88RNR]

here the only pic i could find. there not negative but theres not to much arch

[studentwheeler]

Don't have anything you need but would be interested in the aussie....what are you looking to get for it? I have a spool if you'd want that.

[yota_krawler]

I have 3inch lift springs for an 81 pickup, a 81 rear axle with a 4.10 third and a 22r rebuilt carb off my old 85 and a bench out of the 81, needs a cover and its not a 60/40 but I will trade for the 2 cases if they are top shift gear t-cases. I live in redding and go to chico every weekend. (that where my project is)

[THE ROCK]

I have the original, working complete rear axle assy from my 80-4:37 gears(4-speed truck)-250?? b/o Im in Vallejo

[Sparkplug [OP]]

Sale pending, thanks for the offers, still looking for Chevies and some 32-35 inch tires.

[Sparkplug [OP]]

I think other sale fell through. So still looking. Thanks

[THE ROCK]

mine still available

[studentwheeler]

Any word on sellin the aussie?

[Sparkplug [OP]]

I dont really wanna sell it, would rather trade, but when I bought it like a 18 months ago I paid 240 with shipping. Id sell it now for 200. Its still in the chunk too by the way. The carrier itself is pretty scarred up from pinion bearing going out, but the locker is fine, if a little dirty.

[studentwheeler]

I dont really wanna sell it, would rather trade, but when I bought it like a 18 months ago I paid 240 with shipping. Id sell it now for 200. Its still in the chunk too by the way. The carrier itself is pretty scarred up from pinion bearing going out, but the locker is fine, if a little dirty.

I'd trade ya my spool (complete with newer bearings) + $100 if you wanna go that route.

[51504ROCK]

I think i have a good set of stock front springs. I will have to look. I do have a 60/40 seat setup. The driver side is Blue and the pass side is Brown. Here is a pic of them. Pm me if interested. Located in Tracy CA