Author Topic: Full width 4runner in the werks! (Read 20115 times)

Suprarunner · « **on:** Oct 28, 2004, 06:34:10 AM »

Ok, I tried my best not to do this but I have had it! Broke another front axle this past weekend at the Gray Rock ride in Birinngham (brand new Longfield super set) and I said that if I keep breaking axles with that set that there coming out. Started the swap last night, picked up my rear end, an 04 H2 14 bolt complete with E locker and disc brakes for $400 bones!!!!!! Going next week for the Dana 60 front and then it will be on like donkey kong.... I'll get some pics and keep yall posted. That rear is 72 inchs from wms to wms!!!! The runners gonna look sick with full widths!!!!

CTENG in KS · « **Reply #1 on:** Oct 28, 2004, 06:58:22 AM »

Kool, you broke one of the new 30 splines longs??? What size tires you runnin? Full width = coolness factor 100!

Gud luk!

Suprarunner · « **Reply #2 on:** Oct 28, 2004, 09:51:39 AM »

Well, didn't break the inner, just the birf. But I just cant seem to keep axles in the front end of that thing. Running 36 sx's with 15x8 beadlocks. I'll keep pics posted of the progress!

BigMike · « **Reply #3 on:** Oct 28, 2004, 11:18:21 AM »

Wait, was it the 27 or 30 spline long?

Suprarunner · « **Reply #4 on:** Oct 28, 2004, 03:13:04 PM »

I guess it was the 27 spline?

? I'm assuming you'd have to change the side gears in the carrier to run 30's right??

GrimReaper · « **Reply #5 on:** Oct 28, 2004, 04:41:09 PM »

What would a set of GM 1/2 ton axles with CTM's Warn shafts and lockright in the front 10 bolt and a 12 both with disc conversion and a full case detroit with4.10s be worth to ya? I even have a flat top passengerside Knuckle for the cross over. Still needs to be machined but I have it. Its In Atlanta.
Warns and CTMS would set you back $950
Full case Detroit is $500
Gears and set up kits$400
Disc kit with Caddie Calipers $400.
Axles have reasonably new seals front was gone through completly in the last 15k ($500 with tierods all new seals, ball joints etc.)

The truck this is in I may EbAy this week but I have a line on a different set of axles.

I am going pull the Warns and CTM more then likely.

Get back to me quick if you want to make an offer. I need to get this truck out of here. Not using it and tired of paying insurance on it. Kid just ran up $800 at the dentist so I need the money.

Suprarunner · « **Reply #6 on:** Oct 28, 2004, 05:26:46 PM »

Thanks for the offer Grim but /i already bought my rear and have a front lined up next week, that sounds like a sweet set up though!

Suprarunner · « **Reply #7 on:** Nov 01, 2004, 05:27:38 AM »

Stated the strip down Sunday, going to pick up the 60 front today. I think we decided to run the leaf springs in the back and use the factory H2 trailing arm towers to run two links to the outside of the frame rails. That should eliminate all wrap and it will be an easy fab. Going to have to widein' out the front hangers which might be a little more work the ay my SAS is done but no worries... I'm stoked on the idea of a full width runner!!!

Heres some pics of the strip down, more coming! (yea, those are Zuk axles under there...Tight.)

Dammit, I can't get the pics on.......

UNBREAKABLE · « **Reply #8 on:** Nov 01, 2004, 07:26:20 PM »

Full-widths kick

I know. I'm cool too!

Mike D · « **Reply #9 on:** Nov 01, 2004, 08:21:06 PM »

nice steering

Suprarunner · « **Reply #10 on:** Nov 02, 2004, 06:04:29 AM »

Picked up the 60 last night, still trying to get pics on...

Pdaddy · « **Reply #11 on:** Nov 02, 2004, 06:32:02 AM »

Quote from: Suprarunner on Nov 02, 2004, 06:04:29 AM

Picked up the 60 last night, still trying to get pics on...

Picked up?..... more like "dropped off" I gots a big ol 60 tattoo in my yard from that big sucka hittin the ground!!

weres the dang pics mang?!!!!!! Runna looks tight with the skinnies!

UNBREAKABLE · « **Reply #12 on:** Nov 02, 2004, 08:34:40 AM »

That axle isn't staying there. So I'm not going to do anything to it.

Suprarunner · « **Reply #13 on:** Nov 02, 2004, 10:15:23 AM »

That tattoo's sexy and you know it.... As far as the pics, when it comes to computers I'm on the short bus...

UNBREAKABLE · « **Reply #14 on:** Nov 08, 2004, 07:38:46 PM »

You must be one of my passengers then...I DRIVE THAT BUS!

Suprarunner · « **Reply #15 on:** Nov 09, 2004, 04:47:30 AM »

Got the H2 rear end striped down and the 60 busted down (getting ready to weld the spiders) also got the SAS cut out and cleaned up from under the front. Waiting on parts now, axles should be in soon! (still working on pics..

)

Fireimp141 · « **Reply #16 on:** Nov 09, 2004, 12:58:46 PM »

Do you mean got the IFS cut off? or the old axle off? cause that got me confused... i wanna see this H2 axle swap when you done, so get some pics up you computer challenged man!!

Suprarunner · « **Reply #17 on:** Nov 09, 2004, 03:04:21 PM »

Na, my truck had a SAS swap already done and we had to cut it out so that we can rebuild it W I D E R

Hyena · « **Reply #18 on:** Nov 09, 2004, 09:25:28 PM »

Thats what im gonna have to do on my toy.

hawaii500_1999 · « **Reply #19 on:** Nov 09, 2004, 11:22:14 PM »

hey that reminds me of my runner.

looking good

Suprarunner · « **Reply #20 on:** Nov 16, 2004, 07:06:30 PM »

Ok my buddy put some pics on PBB so you guys can check em out there. Here's the link, it's coming along smooth and I'll hopefully be thrashing it very soon!

http://www.pirate4x4.com/forum/showthread.php?t=303021

FatAzzRunner · « **Reply #21 on:** Nov 17, 2004, 12:39:46 AM »

You buddies with PDaddy??? Be careful, he gets a little crazy when he gets the mullet going full force.

Suprarunner · « **Reply #22 on:** Dec 28, 2004, 05:47:06 AM »

Ok, it's been awhile and I know most of you have forgot about this post but I FINNALY figured out how to post pics so here's a couple!

ratzila · « **Reply #23 on:** Dec 28, 2004, 05:57:09 AM »

That's a sweet looking 4runner

. I hope to get my 85 4runner running soon. I'm down in Mobile and have a few friends that frequent Grayrock. If I ever trash my 1ton burb I know what parts are going on my 93 excab

Suprarunner · « **Reply #24 on:** Dec 28, 2004, 06:03:19 AM »

Thanks for the props!

We've been busting our ass's on it damn near everyweekend, still got a little way to go.

iNfErNaL · « **Reply #25 on:** Dec 28, 2004, 09:51:20 AM »

Dee-zam!!!...That Runner is bangin'!!....Good job,it looks real good so far,post some more pics if you can.

Suprarunner · « **Reply #26 on:** Dec 29, 2004, 06:21:14 AM »

Here's some pics before the swap.

Here's a couple of the strip down and building the front spring hangers . Also the 60.

iNfErNaL · « **Reply #27 on:** Dec 29, 2004, 09:37:14 AM »

Dope!!!..............What size are those irocks?.

camo89 · « **Reply #28 on:** Dec 29, 2004, 09:51:00 AM »

um IF jeep all is see are SXs and boggers

iNfErNaL · « **Reply #29 on:** Dec 29, 2004, 10:03:47 AM »

Pssst,

CR,look again..

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Suprarunner [OP]

Related Topics