DONE!

SWAMPER · September 28, 2004, 08:47:08 PM

No but we can learn

Fireimp141 · September 28, 2004, 08:51:19 PM

I pretty much know how, we would just have to take a whole day out to read the instructions and do it step by step...

SWAMPER · September 28, 2004, 08:52:40 PM

Thats cool with me man....it seems easy take tranny off.....take old clutch off....put new one in....bolt tranny back up...blamo

Fireimp141 · September 28, 2004, 08:55:23 PM

I work at a local 4x4 shop, sorta, i just go in and hang out and help out... seems fairly simple.. take off driveshafts, detatch all wires and bolts holding Tcase and tranny on, take off both at same time and pop new clutch it... new bearings and seals and

... reassemble!

SWAMPER · September 28, 2004, 08:59:59 PM

cool....and maybe once im up there I can find meself a cheap lift

Fireimp141 · September 28, 2004, 09:00:56 PM

Lol, cheap is good, unless we talking about quality or girls!

SuperDave · October 04, 2004, 03:01:29 PM

Hey, I have the same exact truck!

LOOKS GOOD!

Fireimp141 · October 04, 2004, 05:38:31 PM

Heres the icon chris

Fireimp141 · October 04, 2004, 05:39:27 PM

Geez dave, whata copy cat! too bad mines better

j/k

SuperDave · October 04, 2004, 06:58:04 PM

Hey, I had mine first! And mine has a solid axle!

And hi-steer as of thursday!!!WHAHOO!!!

Fireimp141 · October 04, 2004, 07:13:06 PM

Ya well, i had mine first, my parents had it NEW in 86, bought it from the showroom

but ures is more trail ready than mine for sure $Beer Chug\'n$

SuperDave · October 04, 2004, 07:34:50 PM

You gotta start somewhere. Good start sofar!!!!!! :thumbs:Whens the SAS?

SuperDave · October 04, 2004, 07:37:40 PM

May I offer you some rock sliders?

Fireimp141 · October 04, 2004, 07:56:30 PM

Lol for less than that, thats for sure haha, my friends actually a great welder and is gonna make me some, but thanx anyways! and the SAS comes as soon as i get the money

SuperDave · October 04, 2004, 08:10:00 PM

Gotta feed the kid somehow!

Hyena · October 04, 2004, 08:17:33 PM

Replacing a cluth doesn't take that long either. I had to do it becasue my cluth decided to have one side fall apart at once. It wasn't cool becasue i was on the rubicon when it happened. I had to have it towed home.

Fireimp141 · October 04, 2004, 08:40:13 PM

How long did it take you?

Fireimp141 · October 31, 2004, 09:30:32 PM

Makin a little progress here... So far from last update

Extended Breathers
Filter Conversion
Corner Conversion
New spark plugs/wires/dissy cap
Body Lift
Front Bumper removal
Clutch ordered

Heres some pics
1.My hoses for the extended breathers
2.General Engine Shot
3.Filter Pic

Fireimp141 · October 31, 2004, 09:31:58 PM

1. Front Pic
2. Front Right pic
3. Profile shot

iNfErNaL · October 31, 2004, 10:09:24 PM

Quote from: Fireimp141 on September 28, 2004, 09:00:56 PM
Lol, cheap is good, unless we talking about quality or girls!

Hey,there's nothing wrong with cheap girls....What's the matter with you?.

WHITE_TRASH · October 31, 2004, 10:48:27 PM

Looks pretty good but Id put some filters on those breather hoses. Get a couple of cheap fuel filters that fit those lines and put them on to save from crap going into the diffs throught the breathers.

SWAMPER · November 01, 2004, 06:35:04 AM

Yeah I think Autozone has some for 2 cyl engines if not SEARS does

79coyotefrg · November 01, 2004, 08:24:34 AM

got that clutch in yet??, swampy i think we are about the same distance from fireimp, you south me east

SWAMPER · November 01, 2004, 11:06:35 AM

Then why the heck does ur profile say Arkadelphia!!!

Darn well if were that close together lets set a day to go wheeling!

P.S Glen where are you located at?

79coyotefrg · November 01, 2004, 05:08:38 PM

i'm in Arkadelphia AR about 75 miles from Texarkana about 250from Dallas

Fireimp141 · November 01, 2004, 08:06:47 PM

Ya im in process of getting filters for breathers, and if ure taht close you should come up and help me put my clutch in this saturday

got to take it out bogging today

was fun, cept i hit my front tow hook on the dip on this one hole, it was a jolter

Hyena · November 01, 2004, 08:59:55 PM

My clutch only took me a couple of hours at the most. Take drivelines off, wires, shifters. Unbolt the crossmember, then the tranny with the t-case with it. (kinda hard with dual cases but still easier then taking them apart). There are a lot of bolts holding the bell housing on. Some by the starter and also some attached to the exhaust. Pop out the old clutch and bearing and then put everything back in. You have a body lift right? It will be a lot easier getting the the bell housing bolts if you have a body lift, i found that out the hard way. It was a pain the get to the top bolts.

Fireimp141 · November 01, 2004, 09:22:39 PM

I got a 3" body lift... any suggestions or little tips i can use b4 this weekend? all info is appriciated!

i dont think it will be that hard, maybe a 6 hr job or less for a novice like me

SWAMPER · November 02, 2004, 06:46:41 AM

Dude I would so go this weekend but Im on call here at work this coming weekend

I done told you to give me a call so we could schedule! Dude is there a good place to wheel in there in Dallas cause Glen, IH-392, ToolGuy and myself might go up there to wheel

Fireimp141 · November 02, 2004, 02:06:12 PM

Um, not really, i have found like 2 local spots that are fun, but they arent very big and whatnot... and i can even wait if someone wants to help me hehehe

News:

DONE!