Topic: dual ultimate cross member question

[*** YELLER ***]

OK FROR has a nice design for a crossmember but I know of a couple that have broken or cracked and well I dont need that

BUDBUILT has a great crossmember/skid plate design but will it work with the rotated adapter that I now have under the Runner


I like the skidplate and crossmember design but who makes them for the MCO7R10, whats a guy to do 

where can I find what I want... post up those links or pictures of what you did



 

[DTB]

Call Marlin

[jrock]

Could you cut the Bud cross-member around the last mount and rotate it?

[*** YELLER *** [OP]]

Call Marlin

 

Could you cut the Bud cross-member around the last mount and rotate it?

thats the question

[Steve_925]

you can use the bud built. but you will only be able to use one of the t-case mounts. how about the 4x innovations x member. looks like it would work. havent really heard anything about it though

[*** YELLER *** [OP]]

you can use the bud built. but you will only be able to use one of the t-case mounts. how about the 4x innovations x member. looks like it would work. havent really heard anything about it though

i do like that one also i was just looking at it

[kneedownnate]

What about using a budbuilt style, but make a 10 degree piece which inserts between the crossmember and cases 

[Duffil]

What about using a budbuilt style, but make a 10 degree piece which inserts between the crossmember and cases 

that is what fordh8r did, IIRC. or you can cut and splice with the smoke wrench. ANY crossmember no matter what brand will be the same if it is that style.

[fordh8r]

that is what fordh8r did, IIRC.

Thanks for remembering my build Rex.  I did, however, scratch-build the whole x-member on mine. I used the motor mount mounting points from two stock x-members and then welded them to my own plate design with the added angle for the rotated case.  The pics are in my build thread linked in my sig line. 

[*** YELLER *** [OP]]

just ordered this from 4Xinnovations i like the design and i can make it a skidplate also




 

[jrock]

Or you could do that.

[John Doe]

Its a sturdy mount. If you will be using the stock e-brake, you will need to bend the arm up a little so it does not hit the rear arm on the cross member.

[kneedownnate]

That's fawkin gorgeous   

[germ]

Looks sweet. T-case mount looks different. Have'nt seen one like that before.