Author Topic: Rancho 9012 shocks  (Read 2129 times)

0 Members and 1 Guest are viewing this topic.

82fb

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Posts: 13
  • Member since Aug '05
  • Crawling with Marlin
    • View Profile
Rancho 9012 shocks
« on: Oct 08, 2008, 09:15:44 PM »
I am dropping the front suspension of my 85 toyota and need to get rid of these shocks and get some shorter ones.  They are a few years old, but in perfect working shape, no leaks.

$80 for the pair, or if someone has some shorter ones we could trade that would be perfect.

Thanks,

mark
760-8156

located in coarsegold...

blackdiamond

  • Trade Count: (+1)
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1174
  • Male Posts: 5,057
  • Member since Dec '03
  • Crawlin with Marlin
    • View Profile
Re: Rancho 9012 shocks
« Reply #1 on: Oct 08, 2008, 09:18:53 PM »
I am dropping the front suspension of my 85 toyota and need to get rid of these shocks and get some shorter ones.  They are a few years old, but in perfect working shape, no leaks.

$80 for the pair, or if someone has some shorter ones we could trade that would be perfect.

Thanks,

mark
760-8156

located in coarsegold...

What length are you looking for?  I have a set of 12 inch Bilstein's that I just swapped out for Rancho 9000XLs.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

82fb [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Posts: 13
  • Member since Aug '05
  • Crawling with Marlin
    • View Profile
Re: Rancho 9012 shocks
« Reply #2 on: Oct 08, 2008, 10:55:16 PM »
My shocks are about 33 and 19 inches extended and compressed, which is about 14 inch travel.  I think a couple inches shorter on the compressed side would be perfect.  If you cold measure yours, or get me the part number I will check it out.

Thanks...

blackdiamond

  • Trade Count: (+1)
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1174
  • Male Posts: 5,057
  • Member since Dec '03
  • Crawlin with Marlin
    • View Profile
Re: Rancho 9012 shocks
« Reply #3 on: Oct 09, 2008, 07:07:40 AM »
My shocks are about 33 and 19 inches extended and compressed, which is about 14 inch travel.  I think a couple inches shorter on the compressed side would be perfect.  If you cold measure yours, or get me the part number I will check it out.

Thanks...

http://board.marlincrawler.com/index.php?topic=50389.0

They are the 12 inch shocks that Marlin Crawler sells.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

82fb [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Posts: 13
  • Member since Aug '05
  • Crawling with Marlin
    • View Profile
Re: Rancho 9012 shocks
« Reply #4 on: Oct 09, 2008, 08:41:18 AM »
Those should be fine.  If I get mine sold, I will take yours, unless you wanted to trade.  Where are you located?

blackdiamond

  • Trade Count: (+1)
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1174
  • Male Posts: 5,057
  • Member since Dec '03
  • Crawlin with Marlin
    • View Profile
Re: Rancho 9012 shocks
« Reply #5 on: Oct 09, 2008, 11:45:08 AM »
Those should be fine.  If I get mine sold, I will take yours, unless you wanted to trade.  Where are you located?

I'm in WA and am not interested in a trade since I have a full set of shocks already.  My list of other wants/needs is very specific and will probably required purchasing new.  The cash from my old shocks is going to offset the cost of the ones I already purchased.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

82fb [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 0
  • Posts: 13
  • Member since Aug '05
  • Crawling with Marlin
    • View Profile
Re: Rancho 9012 shocks
« Reply #6 on: Oct 09, 2008, 06:42:00 PM »
Still for sale or trade...

 
 
 
 
 

Related Topics

11 Replies
3422 Views
Last post Feb 27, 2003, 02:18:48 PM
by Newman
4 Replies
1633 Views
Last post Oct 05, 2007, 07:31:25 PM
by crawlerdan
2 Replies
1741 Views
Last post Jun 07, 2008, 04:39:07 PM
by TroyPleuss
10 Replies
2786 Views
Last post Nov 08, 2009, 03:50:40 PM
by 88_Pathy
20 Replies
2143 Views
Last post Feb 22, 2011, 07:36:30 PM
by crawlerbubba