0 Members and 4 Guests are viewing this topic.
I'm sure MCMaster-Carr would have something. they rock For bearing races I bought a kit with aluminum waffers machined to all the most common sizes. The flip side also works for seals, works real good. Got it from my local parts store.Edit: this is the same kit I havehttp://www.bobstools.net/Store/LS12980.html
For bearing races I bought a kit with aluminum waffers machined to all the most common sizes. The flip side also works for seals, works real good. Got it from my local parts store.Edit: this is the same kit I havehttp://www.bobstools.net/Store/LS12980.html
this appears to be the same thing wermz has, but harbor freight http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95853
That is pretty sick...
Looks like the same thing, but I'm sure Harbor freight could still screw that tool up as well.
you are an Anomalous Phenomenon
use a hammer and a 4x4 wood block....that is what i used on your and my crank seals, and they have yet to leak.....
toyminator2000 – There has to be dumb people in order for there to be smart people
That is a bit different. A knuckle trunion race is a bit hard to get right with a 4x4. That goes the same with the outer axle seal. But yeah, it has not leaked yet.
use a smaller piece of wood
I like to hit it from the side at an angle!!
I prefer wood for driving races in too.....seems that I always get them thingy-eyed with a punch
Mark, why'd you hafta go and post that amazon link I found 38 matches on there for brass punch, including this neat little set I'm gonna hafta buy now!http://www.amazon.com/8-Piece-Short-Pin-Punch-Set/dp/B000WR1RL2/ref=sr_1_3?ie=UTF8&s=hi&qid=1218055199&sr=1-3http://www.amazon.com/s/ref=nb_ss_hi?url=search-alias%3Dtools&field-keywords=brass+punch&x=0&y=0
Started by 1Bad4Runner Engine
Started by yotadork83 Parts Wanted
Started by KYOTA Project Research and Build-Ups
Started by emsvitil Toyota Pickup/4Runner Tech 1979-95
Started by datkinson 1984-1988: How-To Guides