marlin spring question height

[94toytruck]

just wondering if anyone that has them could give me a fender lip to center of hub measurement and let me know if they have a body lift or not.trying to figure out what to do with rear of truck sice i have 3 inch springs with longer shackles.thinking probly add one leaf and maybe small block for now.thanks guys.

[CruzrDave]

On my 1990 with the 4" Marsprings, 1" drop hanger and a 5" C to C shackle, center hub to fender lip is 28" and top of tire (37) to fender lip is 10"

[94toytruck]

sweet i should be pretty close then.i got my winch and all my trail stuff and a bunch off parts for swap laying in back and im at 27 center to fender in rear now.

[94toytruck]

just curious what you got for springs in back?thanks

[94toytruck]

installed mine over the weekend. im monster trucking it.with full marlin kit on im at 30 center to fender.thats without winch or bumper.i set winch on rad support and had a friend sit up there came down half inch.i drove it around awhile and flexed it pretty dam hard a bunch of times.flexes awsome rides good just sits high.i have a 94 sc sb with 22re.i cool to remove a leaf or so on these???just trying to get the thing down some.

[Hyena]

pictures!!!!

[94toytruck]

http://members29.clubphoto.com/eric835328/owner-504b-1.phtml

under progression.ill get more tomorrow when its light out.no flex shots sorry.

[CrabDiggs]

Give it a hard thrashin trip or two to let them break in, they'll sag.

[94toytruck]

i pulled the 2 lower leafs today and got it sitting like that.dropped it 1 3/4 inchs.i dont have a winch bumper on yet so i figure it will drop some then and settle about into place if it gets to low ill just add a leaf when needed.my truck is super lght which doesnt help with ride height.last time i weighed it with trail gear in truck full tank and ifs.was like 3400 or so.

i need ft shaft and weld on shock towers then im going to wheel the heck out of it.