1990 Toyota Crawler/DD

Started by homeless Duck, June 28, 2008, 12:34:58 PM

0 Members and 1 Guest are viewing this topic.

Pat

another thing, you sure it has 4.10's?  It seems lower geared than that to me when I drove it down the rode last night after you left
Sharing time between Northern Ca and Western Tn..

homeless Duck

Yea, it has 4.10's. I don't know why it's like that, it's weird... That's why I never re-geared. It cruised down there at 80-90 the whole way.

Pat

did you ever pull them and check, or is that what he told you?  My runner 33 and known 4.10s is way taller geared out of the hole
Sharing time between Northern Ca and Western Tn..

homeless Duck

I never pulled them. He said they were 4.10's, so I assumed they were. I'm anxious to see what they are actually, when are you pulling the diffs?

Pat

Sharing time between Northern Ca and Western Tn..

ToYocRawleR

Theyre 4:10s For sure, slight chance that rear may have 4:37s but thats it.
-
Rigs:
05 F-250 Powerstroke
93 RunneR ...Build-up  http://board.marlincrawler.com/index.php?topic=85644.0

fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice"
Just kidding man. I guess there is, its your bed

ToYocRawleR

Pat what are your plans for the truck?
-
Rigs:
05 F-250 Powerstroke
93 RunneR ...Build-up  http://board.marlincrawler.com/index.php?topic=85644.0

fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice"
Just kidding man. I guess there is, its your bed

Pat

Building it up, lowering it down,  Pretty thrashed now,  But I needed AC and a pickup bed,, I just could not see tearing up my runners, Adjusted the valves today, a few tight ones, a few real loose ones(real loud), timing chain is shot, no guides left (Ordered kit from engine builder), Rear tires completely bald, He claims they got that way in the last 190 miles :think:..  it was not worth 2750 at all but like I said it is what I wanted, cold ac, plus I have all the parts to make it decent again,  I have a turbo trans and a New dual ultimate i just built, A rear elocker( want to trade for high pinion now, rear housing is completey junk, smashed and twisted, but I have another, I have new 5.29s and set up kits so i will be bust for a while..  But i will get my son out there and show him how to weld and wrench.. 
Sharing time between Northern Ca and Western Tn..

yotamckimboy4x4

if thats what you wanted then why are you complaining so much?
"We ride together, We die together, YOTABOYS FOR LIFE"    85 toy pickup 5 inch springs 2inch body lift, 36" IROKS, custom front bumper
"HOLD ON TIGHT"

Pat

Not complaining too much,,  things where just a little under stated,,  All is good in toyota land :biggthumpup:
Sharing time between Northern Ca and Western Tn..

homeless Duck

Quoteit was not worth 2750 at all

I'll gladly take it back for $2750. I never said it was mint, but it wasn't junk either.

QuoteRear tires completely bald, He claims they got that way in the last 190 miles

I have pictures of them before I left, would you like to see them? 85mph on the freeway eats Iroks. If you wanted the tires in the condition they were when it was listed, you should have driven up and trailered it back.


Pat

It is all good there Duck,,  Not going to argue over anything, Just the chance you take when you buy sight unseen,  Good luck on your rig what ever it may be
Sharing time between Northern Ca and Western Tn..

Pat

oh yea, it is for 4.10's and it does run good, i have had a few dozen toyotas over the years and this one does have great power.. it will be fun to build..  I may have a extra cab cab I will be putting on :beer:
Sharing time between Northern Ca and Western Tn..

homeless Duck

 :beerchug:

I had plans for an X-cab, it would look sick with one.. My next project is an lt1 280z.

Hope everything works out well for you, and I'm looking forward to seeing update pics.