Moab trip pics

Started by SLIVER, April 29, 2008, 03:01:45 PM

0 Members and 1 Guest are viewing this topic.

SLIVER

1st trip out with the 4runner, it did pretty good. only had one close call. There is never enough time down there ya know! I included a pic of my new wheelin partner. Let me know what you think.
PS I'm glad that I had the MC rock sliders on!!!!

))--SLIVER-->
))--SLIVER-->

4x4Haze

Man that was Close!!! And i think you runner is my favorite  :love:
A jumper cable walks into a bar. The bartender says, "I'll serve you, but dont start anything."

jrock

Purrdy runner. Cool pic, glad you didn't mess up that paint.

79coyotefrg

:ack:  were you TRYING  to flop it on its side :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

SLIVER

Quote from: 4x4Haze on April 29, 2008, 03:18:08 PM
Man that was Close!!! And i think you runner is my favorite  :love:
Thanks man!
Quote from: 79coyotefrg on April 29, 2008, 03:44:21 PM
:ack:  were you TRYING  to flop it on its side :ack:
No I just hit the hole that everybody else missed, my runner takes good care of me though!

))--SLIVER-->
))--SLIVER-->

Yoat Goat

I'm not a professional or anything but I dont think your supposed to do that...

Cool pics nonetheless! The marlin shirt is bling!
T urning
O ver after
Y ears
O f
T rail
A buse

SLIVER

Quote from: Yoat Goat on April 29, 2008, 04:14:31 PM
I'm not a professional or anything but I dont think your supposed to do that...

Cool pics nonetheless! The marlin shirt is bling!
I'm no professional either, most likely the reason that it did happen! Ha Ha

))--SLIVER-->
))--SLIVER-->

NorCalToy

damn that looks pretty intense, was there any body damage or wa it just sitting on the sliders?
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

SLIVER

No body damage, my MC sliders saved the day. Glad that I spent the $140 bucks for sure.

))--SLIVER-->
))--SLIVER-->

ajordan1975

I love the color of your truck!  :thumbs:
1990 4Runner, SAS, 22re, 5spd, Dual stock cases, Locked f/b, interior cage

SLIVER

Quote from: ajordan1975 on April 30, 2008, 08:31:49 AM
I love the color of your truck!  :thumbs:
Thanks man, I am fond of it as well.

))--SLIVER-->
))--SLIVER-->

toyotaexo


Volcom

Did you get the brown stain out of the seat??   :greengrin:  What trail was that on?  Moab is always a good time, never enough days in the trip to run everything out there.

Your little girl is cute, how did she handle Moab?  I've got a 3 year old girl and I plan on taking her out quite a bit this summer!
84 4Runner
Swapped EFI and a rebuilt 22RE
Marlin Dual Ultimate crawler
Marlin high steer
TG springs
5.29's, Aussie locked front and rear
39.5" Iroks on 15x10 2.5" backspaced wheels
109" wheelbase
Addicted Off Road 8 point cage
Addicted Off Road front bumper

Addicted Off Road

Colorado Marlin members, check out the Colorado section!!!

SLIVER

Quote from: Volcom on May 02, 2008, 07:41:05 AM
Did you get the brown stain out of the seat??   :greengrin:  What trail was that on?  Moab is always a good time, never enough days in the trip to run everything out there.

Your little girl is cute, how did she handle Moab?  I've got a 3 year old girl and I plan on taking her out quite a bit this summer!
Thanks man, it was on Hells Revenge in a stupid spot, I just picked a bad line, and ya I stained the new seat covers.
My girl is 9 mo. old and she had a blast, she got to ride in a forward facing car seat for the first time while we rode trails. It was still a little cold for her with the top off the runner though. She was dressed in her winter clothes for most of the trails. Still way fun though.

))--SLIVER-->
))--SLIVER-->

skipnrocks

Quote from: SLIVER on May 02, 2008, 08:14:26 AM
and ya I stained the new seat covers.



Ewww!!  LOL

Sweet rig man!  That color is awesome!  I cant wait to get out to moab again!
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

SLIVER

Quote from: skipnrocks on May 03, 2008, 04:46:15 PM


Ewww!!  LOL

Sweet rig man!  That color is awesome!  I cant wait to get out to moab again!
Thanks man, Good news though, I borrowed the wifes steam cleaner and the brown stain came right out! LOL

))--SLIVER-->
))--SLIVER-->

blackdiamond

Quote from: SLIVER on April 29, 2008, 03:01:45 PM
1st trip out with the 4runner, it did pretty good. only had one close call. There is never enough time down there ya know! I included a pic of my new wheelin partner. Let me know what you think.
PS I'm glad that I had the MC rock sliders on!!!!

))--SLIVER-->

I didn't touch a slider while in Moab a few weeks ago, but my rear bumper took a beating.

I know exactly where that spot is (the exit of Hell's Revenge) and I've seen that done.  :gap:
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

SLIVER

Quote from: blackdiamond on May 04, 2008, 09:19:56 AM
but my rear bumper took a beating.

  :gap:

Time for the bob job. I bobbed 10" out of mine and have no back bumper and didn't even come close to hitting.

))--SLIVER-->
))--SLIVER-->

blackdiamond

Quote from: SLIVER on May 04, 2008, 03:21:01 PM
Time for the bob job. I bobbed 10" out of mine and have no back bumper and didn't even come close to hitting.

))--SLIVER-->

:nope:

My 85 truck was bobbed about 13 inches so I know the joy, but the 4Runner is all about more room for family.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

SLIVER

Thats why I bought a runner.

:yesnod:

))--SLIVER-->
))--SLIVER-->

TIMS89CRAWLER

looks like a good time man... that runner is beautiful  :love:
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

brandon95

man that thing is CLEAN(well exept for the stain in the seat  :pokinit:) that color is sweet what is it called?

Volcom

Do you have any pics or info on your top??  Did you cut up a stock hardtop?  Looks nice!!
84 4Runner
Swapped EFI and a rebuilt 22RE
Marlin Dual Ultimate crawler
Marlin high steer
TG springs
5.29's, Aussie locked front and rear
39.5" Iroks on 15x10 2.5" backspaced wheels
109" wheelbase
Addicted Off Road 8 point cage
Addicted Off Road front bumper

Addicted Off Road

Colorado Marlin members, check out the Colorado section!!!

SLIVER

Quote from: brandon95 on May 07, 2008, 01:22:24 AM
man that thing is CLEAN(well exept for the stain in the seat  :pokinit:) that color is sweet what is it called?
It is a Kawasaki motorcycle color, not sure of the name but the paint is made by DeBeer and is a candy color as far as their standards go.

))--SLIVER-->
))--SLIVER-->

SLIVER

Quote from: Volcom on May 07, 2008, 08:59:39 AM
Do you have any pics or info on your top??  Did you cut up a stock hardtop?  Looks nice!!
I don't have any pic's yet but I'll take some and get them up the first of next week for ya. I did just cut up a standard hard top, I liked that idea better than a canvas top or a bikinni top.

))--SLIVER-->
))--SLIVER-->

blackdiamond

Another Moab thread dug up for SqWAdoosh.

This is a classic example of knowing what the ledge looks like before dropping off. I have seen a truck do pretty much the same thing and did a smaller version myself. I just take one of the other routes now to avoid having to get out to look.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved