0 Members and 1 Guest are viewing this topic.
i think the only thing that matters though is how much force it takes to turn the knuckle (12-15lbs. i think), the shims adjust that.
If you run Marlin's new Super Seals the centering of the knuckle is not as critical as with the stock seals. Pre-load on the bearings is critical, especially if you are running some big, wide meats.
Started by Drip_Torch Parts Wanted
Started by 42s on u Parts Wanted
Started by OAE Toyota Tacoma/4Runner/T100/Tundra/FJ Cruiser 1995+
Started by *** YELLER *** Parts Wanted
Started by *** YELLER *** General 4WD Discussion