Author Topic: Updated, with pics and more stuff, san luis obispo, ca (Read 5319 times)

toy87 · « **on:** Jan 30, 2008, 03:30:56 PM »

UPDATED, this is what i have left
1984 solid axle $100
-The axle is currently disassembled as it needed an axle seal, i have new seals but have not put it back together.
-The axle does not have a third.
-There is an stock set of birfs and two stock sets of inners
front u bolts $10
set of rears out of an 87 $30
batt charger 6volt/12volt $10 SOLD
sony cd player $25 SOLD
helmet dot approved $25 SOLD
rear main for 22re with gaskets still in bag $10
Box of missilanious seals and gaskets $20 its the $100 dollar one that does the entire motor with some missin. and some extras everything in the scattered gasket pic is included.
2" motor mount lift plates. $20 made them myself
sliders, The sliders are the roger brown version of 2" square tubing. They were on a 87 4runner. also have the flare out design
http://www.4crawler.com/4x4/ForSale/Images/nerf_04.jpg
this is not my truck but the same sliders. $150
I am located in san luis obipo, ca
all parts are plus shipping. thanks, all offers will be considered as well.

bad luck · « **Reply #1 on:** Jan 30, 2008, 04:51:41 PM »

how much for just the high steer

dingleberry87 · « **Reply #2 on:** Jan 30, 2008, 05:13:39 PM »

How much for da front axel??

megolfer · « **Reply #3 on:** Jan 30, 2008, 07:22:46 PM »

I have a new asian card I will trade you

toy87 · « **Reply #4 on:** Jan 30, 2008, 09:53:15 PM »

going to add a price to the whole package. Other than that if i get a decent offer i will consider splitting it up.
Also I would REALLY LIKE to sell all of it in one shot.

yotzilla · « **Reply #5 on:** Jan 31, 2008, 04:37:33 PM »

why dose the stearing arm need to be shortend and tapped, do you have a pic, if I see it it will help make my decision its a long drive, for me

toy87 · « **Reply #6 on:** Jan 31, 2008, 11:17:29 PM »

the arm may need to be shortened as i bought it separate from the other and i think i ended up with two pieces that are meant to be tie rods and not one that is for the drag link. if this does not make sense then please call me 707-479-4237

And sorry i have no use for an asian carb as my truck is an efi.

toy87 · « **Reply #7 on:** Apr 02, 2008, 10:26:33 AM »

lowered the price and added a top shift transfer case, could help with delivery... someone make me an offer.

dime · « **Reply #8 on:** Apr 02, 2008, 10:52:19 AM »

how much for just the tcase

toy87 · « **Reply #9 on:** Apr 02, 2008, 03:14:21 PM »

$80 for the case, worked great when i took it out. would like to get ride of all in one package tho. if not oh well, i guess we don't always get what we want.

toy87 · « **Reply #10 on:** Apr 08, 2008, 09:11:41 AM »

transfercase is pending
offers on the rest?
will be adding some random stuff later, sliders, cd deck, oddessy battery, maybe some other stuff

REG535 · « **Reply #11 on:** Apr 08, 2008, 11:25:02 AM »

put me in line behind toy87 if he doesnt get the t-case, are you willing to ship items?
what kind of sliders and what kind of oddessy battery?

toy87 · « **Reply #12 on:** Apr 08, 2008, 01:39:17 PM »

got a couple in line for the transfercase. pending to Dime currently
batt is the PC925 and is 2 years old. $100
The sliders are the roger brown version of 2" square tubing. They were on a 87 4runner. also have the flare out design
http://www.4crawler.com/4x4/ForSale/Images/nerf_04.jpg
this is not my truck but the same sliders. $150
sliders are currently in santa rosa, ca. but they can be moved.
everything else is in san luis obispo, ca

toy87 · « **Reply #13 on:** Apr 08, 2008, 10:57:48 PM »

here are some pics of my stuff.
sony Cd deck has harness attached $25
odyseey battery is $100 SOLD

6 volt battery $20 two years old, used very little.
1 amp battery charger, 6volt/12volt $15
set of rear springs with two extra leafs from another set of rears $50
solid axle with high steer, pitman arm, ubolts, wheel spacers, dissasembled, no third member. With an extra set of birfs $200

toy87 · « **Reply #14 on:** Apr 08, 2008, 11:07:19 PM »

helmet, its dot approved its a XL $25

85cj7man · « **Reply #15 on:** Apr 09, 2008, 11:05:11 AM »

how much for the front axle and leafs?

toy87 · « **Reply #16 on:** Apr 09, 2008, 10:01:15 PM »

front axle and leafs for $150

also transfercase is sold to Dime
and battery is sold local.

NorCalWheeler · « **Reply #17 on:** Apr 09, 2008, 10:27:26 PM »

Is that $150 for the axle, third, and the other pieces for assembly?

toy87 · « **Reply #18 on:** Apr 10, 2008, 06:25:54 PM »

no its not "$150 for the axle, third, and the other pieces for assembly?"
thats axle with leafs no third and all the other parts.

pics of the long field birf that is iffy, others are in good shape.

bad luck · « **Reply #19 on:** Apr 10, 2008, 06:50:27 PM »

how much for just the long fields

toy87 · « **Reply #20 on:** Apr 10, 2008, 07:40:33 PM »

well they are an older set of longfields just so everyone knows, one is in good shape and one is showing sings of griding inside the cage that is the one i have shown a pic of.
for just the long field birfs, no inners $75 with inners $100
not sure but they might be able to be replaced for waranty, on the birf, not sure tho.

highsteer and wheelspacers sold, longfields pending.

toy87 · « **Reply #21 on:** Apr 13, 2008, 07:29:12 PM »

updated, with what i have left

toy87 · « **Reply #22 on:** Apr 21, 2008, 08:39:48 PM »

offers??? anything that is reasonble will be accepted.

Doof · « **Reply #23 on:** Apr 22, 2008, 11:37:56 AM »

in interested in the front housing... did that dude buy the birfs?

are the inners longs also?

and how about that rear main gasket or whatever it was you listed

toy87 · « **Reply #24 on:** Apr 22, 2008, 01:55:28 PM »

the longfield birfs are gone, still have the stock birfs and two sets of stock inners.
there is a rear main and the gaskets for it in the bag if thats what you are referring too.

Doof · « **Reply #25 on:** Apr 22, 2008, 05:51:42 PM »

ok cool...

how about the housing?

im interested now in the stock birfs and that rear main kit

toy87 · « **Reply #26 on:** Apr 22, 2008, 07:57:58 PM »

the housing is avialable also, its got hubs, rotors, calipers, knucles, housing and shafts. i can get a better pic if you want. let me know

Doof · « **Reply #27 on:** Apr 23, 2008, 08:32:32 AM »

ok sure... that would be tits for a new pic

superyota · « **Reply #28 on:** Apr 23, 2008, 09:12:45 AM »

are the longs still available?

toy87 · « **Reply #29 on:** Apr 23, 2008, 09:10:16 PM »

Quote from: toy87 on Apr 22, 2008, 01:55:28 PM

the longfield birfs are gone, still have the stock birfs and two sets of stock inners.
there is a rear main and the gaskets for it in the bag if thats what you are referring too.

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

toy87 [OP]

Related Topics