PRACTICALLY ANYTHING YOU WANT (missouri)

Started by DTB, November 29, 2007, 04:03:48 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ... 60
User actions

girlzlikemud2

#900
August 26, 2009, 04:50:40 PM
Quote from: KRT on August 26, 2009, 10:43:25 AM
How much for a set of IFS hubs to 95316?  :D

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#901
August 26, 2009, 04:50:59 PM
Quote from: NorCalPR on August 26, 2009, 04:48:29 PM
IFS hubs? I need two.

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

NorCalPR

#902
August 26, 2009, 05:34:51 PM
Quote from: girlzlikemud2 on August 26, 2009, 04:50:59 PM
I PM'd you. Thanks!

Tried replying, but I punched in the letters wrong because they are so hard to see, and now it won't even show up!

Anywho, are they worn out? The back piece on mine that has the brass bushing is worn out, so I have slop between the hub body and the gear.

Let me know if they're in good condition with no slop. If so, I'll send the money right away!

Thanks
-Phill
"W6FTW"

girlzlikemud2

#903
August 26, 2009, 07:57:20 PM
Quote from: NorCalPR on August 26, 2009, 05:34:51 PM
Tried replying, but I punched in the letters wrong because they are so hard to see, and now it won't even show up!

Anywho, are they worn out? The back piece on mine that has the brass bushing is worn out, so I have slop between the hub body and the gear.

Let me know if they're in good condition with no slop. If so, I'll send the money right away!

Thanks
-Phill

I PM'd you back. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

Kentucky Jelly

#904
August 26, 2009, 08:17:03 PM
I need shifters for a 95 w56 with a forward shift case.  Shipped to 95338.
87 4Runner, IFS, 22RE, W56, 33x10.5 KM2's, 4.88's, ARB Rear, Downey Skid, BudBuilt X-member, Home Fab Front and Rear Bumpers, Sliders, MM Winch, A/C OBA, HID Hella 500's, Downey Header + Flowmaster, Fuel Tank Lift, EB Street RV Head, 268c Cam, Supra AFM, Bored and Balanced Bottom End, Long Travel Some Day, More To Come!

NorCalPR

#905
August 26, 2009, 09:35:29 PM
Jen,

Do you guys have any grey vinyl trim pieces for around the shifters? 01-04 grey, auto or manual is fine, I need to sew together some vinyl for the dual sticks.

Thanks
-Phill
"W6FTW"

starrunner

#906
August 26, 2009, 11:04:28 PM
jen,

how about a gray center console lid for a 99ish tacoma

and a digital clock for around that same year?

thanks,
BEER PONG! you can play me, but cant beat me

the_white_shadow

#907
August 27, 2009, 06:55:02 AM
4.37 geared third member shipped to 77435??

girlzlikemud2

#908
August 27, 2009, 07:38:41 AM
Quote from: the_white_shadow on August 27, 2009, 06:55:02 AM
4.37 geared third member shipped to 77435??

PM's you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#909
August 27, 2009, 08:47:36 AM
Quote from: Kentucky Jelly on August 26, 2009, 08:17:03 PM
I need shifters for a 95 w56 with a forward shift case.  Shipped to 95338.

PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

slander

#910
August 27, 2009, 11:46:35 PM
2002 tacom transfer case input shaft.  Shipped to 60431 as fast as you possibly can (its my DD) and i have a wheeling trip to attend next thursday:D:D)
2002 taco ext cab trd, 3.4 5spd.  255/58/16, OME 882s, all pro bumpers f/r, Inchworm front plate, crawler mounted with an mc07 XD to an inchworm lefty, marlin 4.7 gears, marlin 30spline output, RAD designs triple sticks.  Fj 80FF rear with a spartan locker.

trekkerpaul

#911
August 29, 2009, 08:39:47 AM
I am looking for the Federal version emission items for a 1981 Toyota 4x4.  I can take pics for reference from my other truck, and I already have part #'s.  Let me know if you have it.

girlzlikemud2

#912
August 29, 2009, 01:20:57 PM
Quote from: slander on August 27, 2009, 11:46:35 PM
2002 tacom transfer case input shaft.  Shipped to 60431 as fast as you possibly can (its my DD) and i have a wheeling trip to attend next thursday:D:D)

I PM's you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#913
August 30, 2009, 09:31:39 AM
Quote from: trekkerpaul on August 29, 2009, 08:39:47 AM
I am looking for the Federal version emission items for a 1981 Toyota 4x4.  I can take pics for reference from my other truck, and I already have part #'s.  Let me know if you have it.

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#914
September 01, 2009, 07:02:21 AM
Quote from: Kentucky Jelly on August 26, 2009, 08:17:03 PM
I need shifters for a 95 w56 with a forward shift case.  Shipped to 95338.

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

KingofChilli82

#915
September 01, 2009, 12:29:39 PM
I need a rear driveshaft for an 82 hilux with a fourspeed(L45) and top shift 21 spline. i dont need the yoke ends that bolt to the flange nore the female slip yoke sense im changing those to 88's for more the better angle. shiped to 61523 :beer:

girlzlikemud2

#916
September 03, 2009, 07:23:54 PM
Quote from: KingofChilli82 on September 01, 2009, 12:29:39 PM
I need a rear driveshaft for an 82 hilux with a fourspeed(L45) and top shift 21 spline. i dont need the yoke ends that bolt to the flange nore the female slip yoke sense im changing those to 88's for more the better angle. shiped to 61523 :beer:

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

Hottrod81

#917
September 07, 2009, 02:08:45 PM
I need the alternator brackets for an 85-88 truck/4Runner shipped to 93230.  Thanks.

girlzlikemud2

#918
September 08, 2009, 06:45:35 AM
Quote from: Hottrod81 on September 07, 2009, 02:08:45 PM
I need the alternator brackets for an 85-88 truck/4Runner shipped to 93230.  Thanks.

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#919
September 11, 2009, 05:06:43 AM
Quote from: KingofChilli82 on September 01, 2009, 12:29:39 PM
I need a rear driveshaft for an 82 hilux with a fourspeed(L45) and top shift 21 spline. i dont need the yoke ends that bolt to the flange nore the female slip yoke sense im changing those to 88's for more the better angle. shiped to 61523 :beer:

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

Techtafab

#920
September 11, 2009, 07:12:30 AM
R151F with T case
i can pick up, need ASAP
GEARED DOWN CRAWLERS

Lonestar Honcho

#921
September 11, 2009, 01:46:58 PM
Need a coil and igniter set up for my '82 hilux 22r 5-speed to 76108.
Thanks.
DD '82 Toyota 4WD LWB, L-52HD, 31" BFG's, 3" Skyjacker, Orig. Blue paint with AC.

Kentucky Jelly

#922
September 11, 2009, 08:03:49 PM
4.56 8' 4 cyl third to 95338?
87 4Runner, IFS, 22RE, W56, 33x10.5 KM2's, 4.88's, ARB Rear, Downey Skid, BudBuilt X-member, Home Fab Front and Rear Bumpers, Sliders, MM Winch, A/C OBA, HID Hella 500's, Downey Header + Flowmaster, Fuel Tank Lift, EB Street RV Head, 268c Cam, Supra AFM, Bored and Balanced Bottom End, Long Travel Some Day, More To Come!

SWAMPER

#923
September 13, 2009, 10:22:26 PM Last Edit: September 13, 2009, 10:33:47 PM by SWAMPER
i need a front driveshaft for an 85 with the 22r...oh also the front output shaft for the transfer case shipped to 78240
1985 Toyota Pick/Up longbed...bobbed 15",  lifted 5", 36's.....http://board.marlincrawler.com/index.php?topic=36992.0

Techtafab

#924
September 14, 2009, 04:51:32 AM
what a long night  :yawn: got home at 3 am and the wife had to be at work at 7

thanks Jen

after 4 bux at the car wash it looks good
GEARED DOWN CRAWLERS

ajordan1975

#925
September 14, 2009, 05:43:24 AM
 :inthedark:
i need to know if you have driver and passenger sidemarkers for an 84-88 second gen truck or 1st gen 4runner, and D/P brake light lenses or the entire assembly?

thanks
Andy
1990 4Runner, SAS, 22re, 5spd, Dual stock cases, Locked f/b, interior cage

girlzlikemud2

#926
September 17, 2009, 04:24:38 AM
Quote from: Lonestar Honcho on September 11, 2009, 01:46:58 PM
Need a coil and igniter set up for my '82 hilux 22r 5-speed to 76108.
Thanks.

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#927
September 17, 2009, 04:27:27 AM
Quote from: Techtafab on September 14, 2009, 04:51:32 AM
what a long night  :yawn: got home at 3 am and the wife had to be at work at 7

thanks Jen

after 4 bux at the car wash it looks good

Yeah, I knew you would be getting in pretty late. We felt so bad! It was super nice to meet you and to talk to you about some of the stuff you have going on...let us know if you need anything else. Thanks,

Jen
[email protected]
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

girlzlikemud2

#928
September 17, 2009, 04:28:12 AM
Quote from: SWAMPER on September 13, 2009, 10:22:26 PM
i need a front driveshaft for an 85 with the 22r...oh also the front output shaft for the transfer case shipped to 78240

I PM'd you. Thanks!
**If you are requesting parts, please provide a specific year of vehicle, not a range.**

superbutta808

#929
September 18, 2009, 05:11:00 PM
Where in Missouri is the yard?

I spend alotta time in Springfield/Branson area for work. I'd like to come out someday and have a look around.

Dave
Together we stand, divided we fall.
Print
Go Up Pages 1 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ... 60
User actions