Topic: Interior roll cage fer XJ

[*** YELLER ***]

where is a good place to buy a interior cage fer our XJ  I want one that bolts together and I can weld up kinda like the Alpro one that you toyota guys use  is there such a thing    If so let me know.



Thanks   



 

[Duffil]

I have an issue of 4 wheel drive & sport utility from July 04, they covered an XJ cage install that was bought  T&J Performance. 

http://www.tandjperformance.com/products-bpp-xj-cage.htm

But then again, I don't know a lot about jeep products.

[Ruggedjeep]

Id recommend the DandC cage that i have http://www.dandcextreme.com/product_template.asp?pkID=126  Its a pre-bent cage that welds in. Im not a fan of the bolt-together cages. But if that is what you want Rockhard 4x4 makes a bolt together cage.

[*** YELLER *** [OP]]

Id recommend the DandC cage that i have http://www.dandcextreme.com/product_template.asp?pkID=126  Its a pre-bent cage that welds in. Im not a fan of the bolt-together cages. But if that is what you want Rockhard 4x4 makes a bolt together cage.

Neither am I but I thought I could weld it together and I thought it would be easier  but if Im gonna weld it the I should just get the right weldable one the first time    thanks bud 


 

[Duffil]

that is a weld in cage.

[*** YELLER *** [OP]]

I know I was thinkin that a bolt in cage would be cheeper and I could weld it in but they are more than the other


 

[Ruggedjeep]

Actually the "bolt together" cage from rockhard starts at $1000

[MiniSimp]

$550 right here for ya buddy
http://www.dandcextreme.com/product_template.asp?pkID=126

[Gittinit]

$550 right here for ya buddy
http://www.dandcextreme.com/product_template.asp?pkID=126

This is a nice looking cage, but you could alwayse get Blingin to build you one!

[*** YELLER *** [OP]]

$550 right here for ya buddy
http://www.dandcextreme.com/product_template.asp?pkID=126

i like it   

This is a nice looking cage, but you could alwayse get Blingin to build you one!

 



 

[Ruggedjeep]

$550 right here for ya buddy
http://www.dandcextreme.com/product_template.asp?pkID=126

Its the same cage thats in my XJ. Id recommend it... Oh wait, i did in my first post   

[*** YELLER *** [OP]]

Its the same cage thats in my XJ. Id recommend it... Oh wait, i did in my first post  

I know but some one didnt read that(MINI)  thanks


 

[*** YELLER *** [OP]]

Question  can I just cage the front Driver and Passenger seat compartment and have some sorta smaller cage in da rear just to protect her and the Pass. would that be ok 

I just want to build a cage for the driver and pass. seats or should I build it all from scratch I dont know if we need the whole cage unless someone can convince me otherwise Im open to sugeations or ideas 



 

[crashtestdummie]

Rockhard makes bolt in jeep cages.
http:www.4WD.COM
http:www.quadratec.com

[*** YELLER *** [OP]]

Rockhard makes bolt in jeep cages.
http:www.4WD.COM
http:www.quadratec.com

thanks 




 

[DTB]

thanks 




 

dont u guys have a bender? 


























 

[*** YELLER *** [OP]]

dont u guys have a bender? 

 

no  but i know who does    and that doesnt help answer the question



 

[Blingn]

Question  can I just cage the front Driver and Passenger seat compartment and have some sorta smaller cage in da rear just to protect her and the Pass. would that be ok 

I just want to build a cage for the driver and pass. seats or should I build it all from scratch I dont know if we need the whole cage unless someone can convince me otherwise Im open to sugeations or ideas 



 

like we talked about on the phone it has to tie into the exo cage or the unibody.  but i really like the idea that u came p with

kind of like this

[DTB]

like we talked about on the phone it has to tie into the exo cage or the unibody.  but i really like the idea that u came p with

kind of like this

you should build a subframe and tie it in to that...alot of work but its the right way to do it...

[Blingn]

http://board.marlincrawler.com/index.php?topic=31392.0  

and build off of it

[*** YELLER *** [OP]]

http://board.marlincrawler.com/index.php?topic=31392.0  

and build off of it

Yup thats it