Edelbrock 600 CFM Carb w/ jet kit and K&N

Started by YotaJosh, June 20, 2007, 06:17:42 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

YotaJosh

June 20, 2007, 06:17:42 PM
I've had this sitting around since my 302 Ford days. It's an Edelbrock 600 CFM carb. It had electric choke, but was missing when I bought it. I also have a Carter Strip Kit which includes jets, metering rods, needles/seats, etc. The kit works with all Edelbrock and older Carter sidebowl carbs. And you get a 14" chrome air cleaner with a K&N filter.

It's a little big for a Yota, but we all have different interests and friends, so spread the word :greengrin:

Located in Little Rock, AR. I can probably ship it pretty easily on your dime.

Asking $75 OBO for all three.







'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2

79coyotefrg

#1
June 20, 2007, 06:56:42 PM
hey Josh,  you should  post that here -> http://arkansascrawlers.com/yabb/YaBB.pl
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

YotaJosh

#2
June 22, 2007, 12:36:03 PM
Quote from: 79coyotefrg on June 20, 2007, 06:56:42 PM
hey Josh,  you should  post that here -> http://arkansascrawlers.com/yabb/YaBB.pl

Bump.

I might do that.
'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2
Print
Go Up Pages1
User actions