0 Members and 4 Guests are viewing this topic.
today i degreased the motor after going through the forums for a couple hours and i have come to the conclusion that the oil is riding up from the front main seal and spraying on the distriutor making it look like the oil is coming from the half moon or the dist. o-ring but it is the front main crank seal going to tackle that tomorrow. vale cover bolts are nice and snug, when i took it off the valve cover was touching the head and the gasket was cracked in places. half moons had sealant on them the new kit said not to use any chemical adhesives but my buddy at the local nor-crawl shop said to put silicone on the lower side of the half moons.thanks guys this forum is awsome, yotaperformer
ultra black
kinda offtopic, well not directly w/ this guys problem, but is that the technical term for the half moons? I need to replace the ones on my 3RZ head and I just wanna make sure I tell the parts guy the correct part. Thanks, Wes
Plug, Semicircular #11183-50010 Qty 2
Started by Weldo « 1 2 » Engine
Started by wishin4atoy Engine
Started by Shamb Toyota Pickup/4Runner Tech 1979-95
Started by mmml4 Toyota Pickup/4Runner Tech 1979-95
Started by Makohon Toyota Pickup/4Runner Tech 1979-95