Author Topic: help with drain plug, starter bolts (Read 1776 times)

n.c.84 · « **on:** Jan 08, 2007, 04:16:45 PM »

yea...im missing a drain plug on my 84 t-case. also finishing up on new motor swap and new 22r motor doesnt have bolts for the starter motor. these are random and hoping someones has some spares around. im at 1063 crosscut ct. bend or. 97702. will pay all expenses. thanks yall.

89 toy · « **Reply #1 on:** Jan 08, 2007, 04:52:06 PM »

the starter bolts to the bellhousing on the tranny
http://www.marlincrawler.com/htm/diff/pickup_diff.htm all the way at the bottom they will work for the tranny also $4

BLACKDOG · « **Reply #2 on:** Jan 09, 2007, 03:50:40 PM »

On the tranfer case parts and accessories page

http://www.marlincrawler.com/htm/transfercase/tcase_ac.htm

Another 4 bucks

Also, if you want to take advantage of the low profile and you're not needing it on the t-case per say, you can swap your stucok plug off one of your axles to the t-case, and run the low pro plug on the axle.

DAWGTOY · « **Reply #3 on:** Jan 10, 2007, 09:20:46 AM »

hey 84. what you doin so far from nc?
hope things are well with you.
if you was near me i got all you need.
later
dawg

n.c.84 · « **Reply #4 on:** Jan 10, 2007, 03:00:30 PM »

thanx guys....called marlin and everything will be here in two days. man there good!

Author Topic: help with drain plug, starter bolts (Read 1776 times)

n.c.84

help with drain plug, starter bolts

89 toy

Re: help with drain plug, starter bolts

BLACKDOG

Re: help with drain plug, starter bolts

DAWGTOY

Re: help with drain plug, starter bolts

n.c.84 [OP]

Re: help with drain plug, starter bolts

Related Topics


	Author Topic: help with drain plug, starter bolts (Read 1776 times) 0 Members and 1 Guest are viewing this topic. n.c.84 Rock Crawl'n Turtle Points: 15 Posts: 41 Member since Jun '05 Crawling with Marlin help with drain plug, starter bolts « on: Jan 08, 2007, 04:16:45 PM » yea...im missing a drain plug on my 84 t-case. also finishing up on new motor swap and new 22r motor doesnt have bolts for the starter motor. these are random and hoping someones has some spares around. im at 1063 crosscut ct. bend or. 97702. will pay all expenses. thanks yall. Logged 89 toy Rock Master Turtle Points: -1198 Posts: 383 Member since Dec '03 Crawling with Marlin Re: help with drain plug, starter bolts « Reply #1 on: Jan 08, 2007, 04:52:06 PM » the starter bolts to the bellhousing on the tranny http://www.marlincrawler.com/htm/diff/pickup_diff.htm all the way at the bottom they will work for the tranny also $4 Logged 89 ext cab sas with diamond +4 1/2" housing 30 spline longs and hub gears, hp elocker, six studs, arp studs in everything, taco rear with elocker. swaped out 22re for 3.4l supercharged, urd 2.0" pulley, urd fuel management, downey headers, flowmaster, cold air intake, marlin clutch that is straining to hold up BLACKDOG 3.0 Killer Gold Turtle Award Turtle Points: 718 Posts: 7,644 Member since Aug '04 I used to fit Re: help with drain plug, starter bolts « Reply #2 on: Jan 09, 2007, 03:50:40 PM » On the tranfer case parts and accessories page http://www.marlincrawler.com/htm/transfercase/tcase_ac.htm Another 4 bucks Also, if you want to take advantage of the low profile and you're not needing it on the t-case per say, you can swap your stucok plug off one of your axles to the t-case, and run the low pro plug on the axle. Logged Its better to die on your feet than live on your knees "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. " "I don't believe in a government that protects us from ourselves." -Ronald Reagan Don't take life too seriously, it isn't permanent DAWGTOY Rock Master Turtle Points: 460 Posts: 212 Member since Jul '04 aint too old & broke up to sit down yet Re: help with drain plug, starter bolts « Reply #3 on: Jan 10, 2007, 09:20:46 AM » hey 84. what you doin so far from nc? hope things are well with you. if you was near me i got all you need. later dawg Logged 1983 TOY SHORT PICKUP .35/12.50S EXO CAGE HOMEMADE BED CAMO PAINT, REARS UP FRONT CHEVYS IN THE REAR, 4 WHEEL DISK, CABLE LOCKER REAR, LOCK RITE FRONT, 5.29GEARS FRONT & REAR.BOBBY LONG 30 SPLINES 9500 lb WARN WINCH. DUAL T CASES WITH 4.7 IN THE REAR. THANKS MARLIN n.c.84 [OP] Rock Crawl'n Turtle Points: 15 Posts: 41 Member since Jun '05 Crawling with Marlin Re: help with drain plug, starter bolts « Reply #4 on: Jan 10, 2007, 03:00:30 PM » thanx guys....called marlin and everything will be here in two days. man there good! Logged