84 Crawler for sale, 7K

[ksmith]

Selling my 84:
-All-Pro 5" springs with one leaf removed from rear to soften them up
   -greasable shackles front and rear
   -U-bolt flip kit front and rear
-5100 Billstiens front and rear
   -shock hoops
   -extended stainless brake lines
-All Pro high-Steer
   -Hydro assist(Red neck ram)
   -custom front diff guard/hydro assist mount, it's solid  
-4.88 Yukons in the rear from Randy's R&P
   -spooled rear
   -1.5" wheel spacers
-4.88 Yukons in the front also from Marlin
   -spool
    -2" spacers
-power steering conversion
   -reinforced frame around steering box
-PROPANE conversion from GotPropane w/ 23 gallon tank
-4.7 marlin t-case
-new clutch
-new slave cylinders on rear brakes
-All-Pro flatbed kit
-Marlin tall front stinger
   -8000 warn winch
   -hawse fairlead
   -light tabs with rectangular lights beside winch
-tube doors and hard doors
-39.5" Iroks
   -fenders have been trimmed to fit the tires, stuff nicely without rubbing or bumpstops
-Longfield 30 spline chromoloys
   -Axle was rebuilt when 30's went in about a year ago, all seals and bearings were replaced except for the wheel bearings.
   -1.5" wheel spacers
-registered and inspected in TX
-seats out of a corolla or something but are a little weathered
-waterproof stereo and speakers
-new radiator and all hoses
-.120 wall driveshafts front and rear
-Schaffers tube doors
Whats wrong:
-trail scars
-small leak on power steering pump

Almost everything was installed by an offroad shop in Lufkin, TX, www.dynamictx.com. Can show a most of the reciepts from work done. It's been built for about a year and a half.  Asking $7000 obo, located in East Texas. Let me know if you want pics. I'll try and take some after while and post them up tonight.It's still for sale.
Kane Smith
[email protected]

[ksmith]

Here are a couple of pics

[ksmith]

More

[ksmith]

More

[ncrc]

how do you like the propane injection ?

[KYOTA]

bump for ya with whats listed that thing is easily worth what your asking. ncrc, I run the same propane conversion on my 83 and its awesome, runs at any angle and BTW its not injection, runs solely on propane thru a mixer that takes the place of the carb check the link in my sig for my propane install.

[yotamckimboy4x4]

If i didnt have a truck right now i would buy it. im buildin my 84 up andall i need is springs, BTW nice rig. hope u loved the ifoks as much as i do!!

[ksmith]

I like the Iroks. The propane is awesome, I have no complaints about that, it helped probably more than any of the other mods that I did simply because I don't have to worry about it dying on a hill.
Kane Smith

[ncrc]

thanks, i want to go propane but i live in california but you maybe able to get the setup bar aproved if it burns cleaner at the pipe

[ksmith]

Make some offers, I know income taxes are coming in, I'm wanting a bike bad, so I'm negotiable.

[ksmith]

Am I asking entirely too much for my truck or is it just a bad time to sell something?

[ksmith]

New price.

[ksmith]

The truck is ready to go, it needs nothing to hit some trails. Make me some offers people. I'm ready for it to go so I can get something else.

[ksmith]

New price of $8000

[ksmith]

Still for sale!

[ksmith]

BTT

[82 HiLux]

bad luck
maybe try again in spring when people are getting back into camping and wheeling.  dont you hate when you really want to sell something and no body wants it??
What kind of truck do you want to build after this? what style of truck? TUBE BUGGY!!

[82 HiLux]

Ill maybe buy the flatbed and/or tube doors if you cant sell the truck.  I wanted to get an allpro flatbed but dont have a welder and I dont think Ill be getting one for a while, I have too much other siht to get first. 

Just an idea.

Im in northern california

nevermind. just checked your profile...texas is too far! good luck anyways though

[toy4x4ota]

awesome truck. im going to be doing the propane swap to and iwas just curious where you got the propane tank from or it was originaly for. thanks

dallas

[ksmith]

It is out of a motorhome, I'm not sure what kind or anything like that, a guy in our club had it laying around his shop.

[ksmith]

Someone make me an offer.

[ksmith]

New price of 7K.

[ksmith]

BTT

[ksmith]

BTT

[BigMike]

Wow, I can't believe this has not sold yet. Almost 4000 page views too

[rude86]

so does this thing have two cases or one???

[82 HiLux]

-4.7 marlin t-case

if it had 2 it would probably say marlin dual case adapter. but Im not the owner I dunno. 

[rude86]

so this guy is asking 7000.00 for a truck that has only one case, and spools front and rear??? good luck man...

[rrdck858585]

Nice

[ksmith]

The truck has to go, 6000?