Topic: weber 32/36 what do i do with all the vacum lines plese help

[84_yota_4wd]

k guys im about to install a weber 32/36 and take my stock carb off but there are a bunch of vaccume line on it what should i do with them once i put a weber on thanks guys

[Wermz84]

Hey whats up 84Yota,


I would guess that all depends on weather or not you want it to pass smog or not.  There are streel legal kits for that, or you could just say screw it and plug them up..  If you don't have to pass smog anymore

Good luck   


I keep debating between 32/36 or 38/38.

[84_yota_4wd [OP]]

yea well i could do that and i do need toi pass smog but i could just put the stoc k one on for smog so no but i rum a vacume advance distributor and thet runs of tye air cleaner i think i was considering runnithe strock peicesof vaccume equpment on my new k&n air filter and housing. but has n e 1 done this be4

[krawlz]

I just E-mailed you the vacuum diagram to the e-mail address in your profile. The file was to large to put on the forum. I sent it as an attachment.
If you need more contact pierce manifolds.

http://www.piercemanifolds.com/products.htm

Good Luck.   

[79coyotefrg]

k guys im about to install a weber 32/36 and take my stock carb off but there are a bunch of vaccume line on it what should i do with them once i put a weber on thanks guys

throw them in the trash

[Wermz84]

I just E-mailed you the vacuum diagram to the e-mail address in your profile. The file was to large to put on the forum. I sent it as an attachment.
If you need more contact pierce manifolds.

Good Luck.  

Is that the same sort of diagram out of the FSM, or under the hood?   Cause if its Different I too am interested..

throw them in the trash

  whats wrong glen you dont like Webers anymore after your last one??

[kyle_22r]

i think he meant the vacuum lines -- i know you can save what's necessary for "smog legal" reasons, but when i built my last engine, i just pitched them(this was a smog pump, 1st gen emissions setup...yuck).

[84_yota_4wd [OP]]

thanks guys thats very helpful

[kneedownnate]

I have 2 on my 80 with the same carb.  Vaccuum advance and brake booster.  Everything else is plugged or capped. 

[84_yota_4wd [OP]]

sweet

[Wermz84]

84 yota,

have ya started on this yet, howz it going?

[84_yota_4wd [OP]]

na i got to get the carb rebulit first

[krawlz]

Is that the same sort of diagram out of the FSM, or under the hood?   Cause if its Different I too am interested..

Sorry I didn't get back to you on this question, Iv been out of town.

Anyway, what Iv got is the installation instruction that Pierce Manifolds sent me for the weber. It's about 8 pages of mostly crap. but in it is a page with the drawing of the stock configuration, and the weber configuration. (vacuum diagrams). It also has some written intruction as well. If anybody is interested I can scan and email the 3-4 pages that are worthwhile