Okay. I decided I have to either sell this project truck, or sell my spare parts so i can finish it. If you have a better price in mind, or have something to trade, just let me know. Be realistic on shipping, my zip code is 63638. If its heavy or bulky it may be pricy to ship... Thanks for looking. As far as trades go, I need a rear slider for an 87 PU and a Sthil chainsaw or I'd trate for any firearms as well... Cash is always good too!! Other than that I'm open to suggestion.
![Yup yup :yupyup:](https://board.marlincrawler.com/Smileys/marlin/yupyup.gif)
I have acomplete 88 standard cab that is in great shape with very little rust. CLEAR TITLE. The cab is EFI and complete with wiring harness, ect. It has a grey interior and a factory bench seat. The windshield is not cracked and the sheatmetal is straight. The red paint is in good shape. I also have a 1990 frame which has been sanblasted and painted and SASed. The SAS kit is from marlin. I have front and rear axles as well, that are complete rotor to rotor. The front axle is from an 83. The front springs are new Skyjacker 3" rears. The rear dosen't have springs on it, I was going to do the chevy spring swap in the rear but hadn't gotten around to it. There are stock rear springs there though. There is no bed, I was going to tube the rear and go with a flatbed or something. I am located in Southeast Missouri. Make me an offer. It was a project truck, but I bought another 87 that was already set up, so I don't have time to build both projects... I'll post some pictures ASAP Located near Ellington, Missouri.
![Attention!! :attention:](https://board.marlincrawler.com/Smileys/marlin/attention.gif)
So... For sale... 88 EFI standard cab, complete with wiring harness, and a CLEAR TITLE
1990 sandblasted and painted frame, SASed with a kit from Marlin
3" Skyjacker rear lift springs up front
83 Front and Rear Axles, complete rotor to rotor
4 -35" BFG All Terrain tires with 50+% tread, mounted on 15x10 wheels
IFS power steering box to set up crosover steering
Located near Ellington, Missouri 63638
$900 OBONew price $575Get excited.
![Yup yup :yupyup:](https://board.marlincrawler.com/Smileys/marlin/yupyup.gif)
Jeff
jdement12b@yahoo.com
------------------------------------------------------------------------------------------------------------------
Toyota Parts Added 20 Feb 20071983 4x4 PU $40 -Windshield, no cracks or rock chips
$30 -Rear sliding window, no cracks or rock chips, good latch
$25 -Rear sliding window, no cracks or rock chips
$45 -Rear axle, stock, complete drum to drum
$15 -Hood, no dents, needs sanded and painted
$25 -Door, drivers side with vent glass
$25 -Door, passenger side with vent glass
$25 -Door, drivers side with vent glass
$25 -Door, passanger side with vent glass
$15 -2ea. master cylinders
$20 -Rear drive shaft, 2 piece
$20 -Chrome looking grills - 2ea.
$250 -22R engine, complete valve cover to oil pan, good block and head, 153638 miles, running when pulled out
1989 4x4 PU $50 -IFS 3rd with axles and rotors
$40 -Door, drivers side, good glass, with drivers side mirror
$20 -Gas tank and skid plate
$make offer -EFI wiring harness, complete
$100 - EFI intake with fuel rail and injectors
1990 4x4 PU $70 -IFS 3rd with axles, rotors and complete hubs
1994 2wd PU $make offer -2wd tranny, 5 speed
I have a couple engine blocks, EFI intakes, heads, ect too. I just have to go check the ID stamped on them to verify the years...