Author Topic: In Arkansas for sale (Motors, Transmissions, t-case, roll bar) (Read 2399 times)

yellowdemon · « **on:** May 22, 2006, 08:09:50 PM »

99 toyota 2rz 2.4e ngine complete in crate with 33 actual miles with wiring, exhaust, and gas tank -$1100 obo
black roll bar toyota with 2 lights -$80
G52 4s4 5 speed tranny and t-case excellent - 250
2wd tranny 5 speed 84-88 -100
22r complete with everything, powersteering, radiator, carb, alternator, immaculate motor with 840 miles on it after the rebuild, company sent me the wrong size main bearing and i spun one after 840 miles, $500 as is
Printer for a computer nice -40
yamaha blaster head -20

79coyotefrg · « **Reply #1 on:** May 22, 2006, 08:15:25 PM »

and a thread is born

i'll try and get ahold of him tomorrow about the rollbar

yellowdemon · « **Reply #2 on:** May 22, 2006, 08:19:19 PM »

sweet, i'm making progress

pickemup81 · « **Reply #3 on:** May 23, 2006, 12:52:03 AM »

What part of arkansas are you located? That 22r sounds prime.

yellowdemon · « **Reply #4 on:** May 23, 2006, 05:54:44 AM »

The motor is absolutely clean, i hate getting rid of it but i'm dropping in a 350. I live in Bald knob, the motor is painted blue along with all of the pulleys. Its a good looking motor, it has a rv cam in it and everything has been properly done when i installed it. Let me know

pickemup81 · « **Reply #5 on:** May 23, 2006, 12:09:44 PM »

Do you have any pics?

yellowdemon · « **Reply #6 on:** May 23, 2006, 06:20:02 PM »

yeah, I have some pics that I can email you if you want me to, I just need your email address. Or you can go to this link and see them. If it don't work let me know and I'll send them to your email.

http://www.pirate4x4.com/forum/showthread.php?t=475430

yellowdemon · « **Reply #7 on:** May 24, 2006, 07:53:45 PM »

Sold 2wd 5 speed

yellowdemon · « **Reply #8 on:** May 27, 2006, 08:38:42 AM »

6.72:1 · « **Reply #9 on:** May 27, 2006, 12:50:26 PM »

Will that transmission and transfer case work in an '87 Toyota pickup 4x4?

yellowdemon · « **Reply #10 on:** May 27, 2006, 02:11:53 PM »

Quote from: SHEER MAGNITUDE OF THE ROCKWELL on May 27, 2006, 12:50:26 PM

Will that transmission and transfer case work in an '87 Toyota pickup 4x4?

Yes it will work in a 87, it will fit between 84-88 toyota's. This is a g52 tranny and tcase, it excellent working order. Since I've bought the tranny used I"ve put 840 miles on it. No bearing noises or any problems. Great tranny and t-case.

79coyotefrg · « **Reply #11 on:** May 27, 2006, 02:49:17 PM »

hey guys we have a arkansas event in hotsprings, check it out http://board.marlincrawler.com/index.php?topic=22146.msg234547#msg234547

yellowdemon · « **Reply #12 on:** May 27, 2006, 03:43:18 PM »

Quote from: 79Coyotefrg on May 27, 2006, 02:49:17 PM

hey guys we have a arkansas event in hotsprings, check it out http://board.marlincrawler.com/index.php?topic=22146.msg234547#msg234547

That's sweet, but I don't figure that I'll be able to attend. That isn't too far away from my house, which is a plus, but the downside is that I have my motor and tranny and t-case out right now and have my chevy stuff sitting in the floor and my chevy350 sitting on the motor stand fixing to be tore down. So I don't have any wheels to go, and my only other truck is a 99 silverado with a 4-5 drop on it. Thanks for the invite tho, maybe next time.

79coyotefrg · « **Reply #13 on:** May 27, 2006, 04:27:30 PM »

well geeze man get to work you got a hole week

yellowdemon · « **Reply #14 on:** May 28, 2006, 08:01:04 AM »

Quote from: 79Coyotefrg on May 27, 2006, 04:27:30 PM

well geeze man get to work you got a hole week

Whoa dude, That would be impossible on my work schedule, I'm tearing down the engine in a couple of hours and going to have my mechanic come over to my house and use his calipers on everything so I know what size to order all of my parts. Got the $$ but don't have the time.

yellowdemon · « **Reply #15 on:** Jun 03, 2006, 11:26:28 AM »

79coyotefrg · « **Reply #16 on:** Jun 03, 2006, 11:29:18 AM »

dude, i wouldnt wait on your "mechanic" go buy some metric calipers at sears for $30-40 and be done

you got till the 21st of july

yellowdemon · « **Reply #17 on:** Jun 03, 2006, 11:52:37 AM »

I aint waiting on him anymore, I just went and bought a new crank last tuesday, waiting on it to come in, and my engine kit came in yesterday, so don't guess i need him anymore

79coyotefrg · « **Reply #18 on:** Jun 03, 2006, 12:55:24 PM »

if you need anything let me know

yellowdemon · « **Reply #19 on:** Jun 03, 2006, 09:36:30 PM »

alrite I appreciate it

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

yellowdemon [OP]

Related Topics