Author Topic: Tacoma 8" e locker gears... (Read 1461 times)

ToYocRawleR · « **on:** May 20, 2006, 08:54:21 AM »

Curious if the standard 8" v6 gears out of my truck will fit in a tacoma e locker diff? thanks

79coyotefrg · « **Reply #1 on:** May 20, 2006, 10:34:09 AM »

ToYocRawleR · « **Reply #2 on:** May 20, 2006, 10:59:49 AM »

No way i thought they were different for some reason. Thanks man

79coyotefrg · « **Reply #3 on:** May 21, 2006, 09:07:53 PM »

yep same critter, i have my original 1979 4.37 gears on my 05 elocker

took a little special "work" but it was doable

jimbo74 · « **Reply #4 on:** May 21, 2006, 09:11:33 PM »

isnt there a difference with the third member? the v6s have an offset to them that the 4 cyls dont have.....

wouldnt that mean that v6 gears wont fit in an 4 cyl elocker third? or does it not matter if the elocker is 4cyl or 6 cyl?

ToYocRawleR · « **Reply #5 on:** May 22, 2006, 05:54:46 PM »

Well now im confused

So the v6 gears will work in the v6 elocker or only 4 cyl gears will work?? and what kind of modifying did you have to do?

Author Topic: Tacoma 8" e locker gears... (Read 1461 times)

ToYocRawleR

Tacoma 8" e locker gears...

79coyotefrg

Re: Tacoma 8" e locker gears...

ToYocRawleR [OP]

Re: Tacoma 8" e locker gears...

79coyotefrg

Re: Tacoma 8" e locker gears...

jimbo74

Re: Tacoma 8" e locker gears...

ToYocRawleR [OP]

Re: Tacoma 8" e locker gears...

Related Topics


	Author Topic: Tacoma 8" e locker gears... (Read 1461 times) 0 Members and 1 Guest are viewing this topic. ToYocRawleR Gettin' Loose!! Silver Turtle Award Turtle Points: 3 Posts: 3,110 Member since Oct '05 The Homie!!! Tacoma 8" e locker gears... « on: May 20, 2006, 08:54:21 AM » Curious if the standard 8" v6 gears out of my truck will fit in a tacoma e locker diff? thanks Logged - Rigs: 05 F-250 Powerstroke 93 RunneR ...Build-up http://board.marlincrawler.com/index.php?topic=85644.0 fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice" Just kidding man. I guess there is, its your bed 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Tacoma 8" e locker gears... « Reply #1 on: May 20, 2006, 10:34:09 AM » yes Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way ToYocRawleR [OP] Gettin' Loose!! Silver Turtle Award Turtle Points: 3 Posts: 3,110 Member since Oct '05 The Homie!!! Re: Tacoma 8" e locker gears... « Reply #2 on: May 20, 2006, 10:59:49 AM » No way i thought they were different for some reason. Thanks man Logged - Rigs: 05 F-250 Powerstroke 93 RunneR ...Build-up http://board.marlincrawler.com/index.php?topic=85644.0 fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice" Just kidding man. I guess there is, its your bed 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Tacoma 8" e locker gears... « Reply #3 on: May 21, 2006, 09:07:53 PM » yep same critter, i have my original 1979 4.37 gears on my 05 elocker took a little special "work" but it was doable Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way jimbo74 Gold Turtle Award Turtle Points: 2872 Posts: 8,707 Member since Sep '05 Re: Tacoma 8" e locker gears... « Reply #4 on: May 21, 2006, 09:11:33 PM » isnt there a difference with the third member? the v6s have an offset to them that the 4 cyls dont have..... wouldnt that mean that v6 gears wont fit in an 4 cyl elocker third? or does it not matter if the elocker is 4cyl or 6 cyl? Logged The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission. ~ John F. Kennedy ~ ToYocRawleR [OP] Gettin' Loose!! Silver Turtle Award Turtle Points: 3 Posts: 3,110 Member since Oct '05 The Homie!!! Re: Tacoma 8" e locker gears... « Reply #5 on: May 22, 2006, 05:54:46 PM » Well now im confused So the v6 gears will work in the v6 elocker or only 4 cyl gears will work?? and what kind of modifying did you have to do? Logged - Rigs: 05 F-250 Powerstroke 93 RunneR ...Build-up http://board.marlincrawler.com/index.php?topic=85644.0 fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice" Just kidding man. I guess there is, its your bed