ok im chancing a very stupid question

Started by GoaT, February 19, 2006, 09:02:56 PM

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages1
User actions

GoaT

February 19, 2006, 09:02:56 PM
is this a factory carb or no??? i can get better pics tomarrow. but the rebuild kit i bought doesnt fit this thing...

can anybody tell me what it is???

CTENG in KS

#2
February 20, 2006, 12:12:58 PM
Pull the air cleaner and see if it says toyota or toyoda on it. 
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

GoaT

#3
February 20, 2006, 12:15:39 PM
oh ya i looked at it and said webber.. any ideas on exactly who to call to find out what series it is? ill give them my seiral #?   and ill post it up in a min when i get back outside. im warming up right now

Ferg

#4
February 20, 2006, 03:22:45 PM
Try CalMini in Bakersfield.
Some idiots are too busy knowing it all, to ever learn anything...

79coyotefrg

#5
February 20, 2006, 08:04:09 PM
thats a 32/36

www.redline.com  for a rebuild kit

or www.lcengineering.com
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

krawlz

#6
February 20, 2006, 08:09:51 PM
It's a weber all right. If it were stock you'd have about 500 vacuum lines.  The model # will be stamped on the base on one end. and will look something like 32/36DGEV.
PIERCE MANIFOLDS are the GODS :bowdown:  of weber.www.piercemanifolds.com
Any man, in the right situation, is capable of murder. But not any man is capable of being a good camper.....So, murder and camping are not as similar as you might think.


Some men are alive simply because it is against the law to kill them.

79coyotefrg

#7
February 20, 2006, 08:11:26 PM
Quote from: GoaT on February 20, 2006, 12:15:39 PM
oh ya i looked at it and said webber.. any ideas on exactly who to call to find out what series it is? ill give them my seiral #? and ill post it up in a min when i get back outside. im warming up right now
you lucky dawg,  you gotta weber too
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#9
February 20, 2006, 08:19:50 PM
Quote from: 79Coyotefrg on February 20, 2006, 08:11:26 PM
you lucky dawg,  you gotta weber too

yah but im out 40 bucks cause i didnt know it was a webber. bought a stock rebuid kit cant return that.....

79coyotefrg

#10
February 20, 2006, 08:24:52 PM
http://www.piercemanifolds.com/Repairkits.htm


mines a 32mm/36mm  yours is a 40mm

what is it for  a stock 22R  take a picture of it,  and put it in the forsale section
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#11
February 20, 2006, 08:33:11 PM
Quote from: 79Coyotefrg on February 20, 2006, 08:24:52 PM
http://www.piercemanifolds.com/Repairkits.htm


mines a 32mm/36mm  yours is a 40mm

what is it for  a stock 22R  take a picture of it,  and put it in the forsale section

put the rebuild kit for sale?

79coyotefrg

#12
February 20, 2006, 08:35:48 PM
Quote from: GoaT on February 20, 2006, 08:33:11 PM


put the rebuild kit for sale?
sure,  is it open??   if it aint open they should take it back,  but if so  then yea  just take a picture of it and post it on the forsale section
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#13
February 20, 2006, 08:39:01 PM
Quote from: 79Coyotefrg on February 20, 2006, 08:35:48 PM
sure,  is it open??   if it aint open they should take it back,  but if so  then yea  just take a picture of it and post it on the forsale section

yah i opened it... stupid me :(  i figured out it was the wrong carb when none of the gaskets would work. ill get a friend of mine to help me sell it. im not good at that sort of thing...

kneedownnate

#14
February 20, 2006, 08:40:52 PM
I picked up my rebuild kits for my weber at the local quality auto parts store, not napa/kragen/autozone.  They were half the price this time cause they were from empi.
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

79coyotefrg

#15
February 20, 2006, 08:41:19 PM
whats it for  , i mean what did you tell the person at the parts counter,  just the year of your truck and toyota??
its probably for a stock aisin carb for a 22R
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GoaT

#16
February 20, 2006, 08:43:40 PM
Quote from: 79Coyotefrg on February 20, 2006, 08:41:19 PM
whats it for  , i mean what did you tell the person at the parts counter,  just the year of your truck and toyota??
its probably for a stock aisin carb for a 22R

oh i know it is....
Print
Go Up Pages1
User actions