22re install in 1st gen

Started by 80crawleryota, January 21, 2006, 06:19:03 PM

0 Members and 1 Guest are viewing this topic.

what is involved in putting a 22re in a 1980 toyota pickup such as wiring is there a wiring diaghram for this engine swap ? thanks for the help

22re from 20 r
1 (33.3%)
1980 swap to 22re
2 (66.7%)

Total Members Voted: 3

80crawleryota


MidgetMike

check out pirate they have a pretty good efi swap thread
Sounds like more tree huggin hippie bull :pokinit:

79coyotefrg

if going efi  from a 1st gen  you might wanna look for a 3RZ,  much more HP than a 22re   and from what i here , actually less wiring
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

i know if this motor i have now has to come out it aint gonna be a carbed engine that goes back in
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

lilbuddy

Quote from: 79Coyotefrg on January 25, 2006, 08:19:38 AM
if going efi  from a 1st gen  you might wanna look for a 3RZ,  much more HP than a 22re   and from what i here , actually less wiring

But Also a lot more money!

Im putting in EFI in my 81 in about 2 weeks. I have all the junk to do it (its all from an 84 Celica GTS). I will maybe have spent about $100 total in doing the swap too.
RIP Kyota.... you are the man

GET IT!!!

79coyotefrg

:think:  you have a very good point there LB
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

whiteman

The wieing on the earlier EFI trucks is fairly simple, it just takes time.  You could easily have it done in a weekend.

Providing you have all the parts.      :yesnod:

80crawleryota

i have a complete 83 celica with the 22re i was going to put it in but i am thinking about staying with the carb for now. due to the fact that i know nothing about wireing