Author Topic: FS:TOYOTA rear and front axles complete (Read 4145 times)

SQUIRREL MONSTER · « **on:** Jan 07, 2006, 12:00:17 AM »

im switching out my axles out here next week and am gonna have no room to keep em in so this is early word of availability. these axles will be available off the truck by next weekend hopefully 01/14/06

complete axles from end to end front and rear. front just had new outer and inner bearings done not too long ago (bout 6 months ago) they are stock 4:10's and are in good shape. no noises or whinning from either end. front wipers and inner seals done about 6 months ago as well. no leaks from either end. front has the large tracking bar bracket shaved off along with the other small brackets. only reason they are going out is because i picked up a set of armored axles with gears and lockers already installed.

id like to get 250 for each end, or 400 for both. open to offers. im also looking for a STRAIGHT clean bed for my x-cab, 1.5 inch wheel spacers (2), rear tube bumper, and front as well. if you have something to trade up im open for it.

ill post pictures of the axles soon as i get back from the bay area.

SQUIRREL MONSTER · « **Reply #1 on:** Jan 07, 2006, 12:00:43 AM »

im switching out my axles out here next week and am gonna have no room to keep em in so this is early word of availability. these axles will be available off the truck by next weekend hopefully 01/14/06

complete axles from end to end front and rear. front just had new outer and inner bearings done not too long ago (bout 6 months ago) they are stock 4:10's and are in good shape. no noises or whinning from either end. front wipers and inner seals done about 6 months ago as well. no leaks from either end. front has the large tracking bar bracket shaved off along with the other small brackets. only reason they are going out is because i picked up a set of armored axles with gears and lockers already installed.

id like to get 250 for each end, or 400 for both. open to offers. im also looking for a STRAIGHT clean bed for my x-cab, 1.5 inch wheel spacers (2), rear tube bumper, and front as well. if you have something to trade up im open for it.

ill post pictures of the axles soon as i get back from the bay area.

scyota · « **Reply #2 on:** Jan 07, 2006, 10:10:55 PM »

what did these axles come out of?

SQUIRREL MONSTER · « **Reply #3 on:** Jan 08, 2006, 01:18:26 AM »

Quote from: scyota on Jan 07, 2006, 10:10:55 PM

what did these axles come out of?

uuhhh, my truck? lol j/k

they came out of my 84 x-cab. they are bone stock. front *might* already be sold. i may require a small deposit to hold em that way people wont try and back out and me have to turn away other people that may really need em. these should be available by next weekend.

SQUIRREL MONSTER · « **Reply #4 on:** Jan 08, 2006, 01:38:38 AM »

here are some pictures of the front when i was cleaning the front endd up. i shall get more close up pictures of the front today in the morn, and pictures of the rearend as well.

SQUIRREL MONSTER · « **Reply #5 on:** Jan 08, 2006, 04:49:19 PM »

more pictures from today...like i said, im open to trades with some partial cash as well. im looking for a pair of 1.5 inch spacers, rear u-bolt flip kit, 84-88 short bed in nice shape. front CV or non-cv shaft to fit the front to fit with a 29 1/4 inch settled.

*FFC* · « **Reply #6 on:** Jan 09, 2006, 09:37:27 PM »

Where are they located?

kneedownnate · « **Reply #7 on:** Jan 09, 2006, 09:57:51 PM »

I'd guess San Diego?

SQUIRREL MONSTER · « **Reply #8 on:** Jan 09, 2006, 11:51:01 PM »

correct. san diego, ca

*FFC* · « **Reply #9 on:** Jan 10, 2006, 11:15:22 AM »

D'OH

guess I coulda looked at yer profile.. I'm lookin for a front, but gotta do some research first... I'll let ya know

SQUIRREL MONSTER · « **Reply #10 on:** Jan 10, 2006, 11:59:39 PM »

LOL, no problemo. LMK.

front and rear still on the truck at the moment but hopefully ill get my knuckle service kit so i can swap out my new front end in by this weekend. should be available there after.

*FFC* · « **Reply #11 on:** Jan 11, 2006, 12:53:50 PM »

PM'd ya

SQUIRREL MONSTER · « **Reply #12 on:** Jan 11, 2006, 10:30:07 PM »

right back at girl!

83parkinlotspecial · « **Reply #13 on:** Jan 11, 2006, 11:31:17 PM »

will you take 150 for the rear? if not will you separate and just sell a third. and will you ship to utah?

SQUIRREL MONSTER · « **Reply #14 on:** Jan 12, 2006, 09:01:10 PM »

to be honest, i would rather not ship it (as i have no idea where or how to ship something that big and heavy) but, if it comes down to it, we'll talk. let me get it out of the truck and ill let you know.

SQUIRREL MONSTER · « **Reply #15 on:** Jan 19, 2006, 10:42:37 PM »

both axles available and out of the truck. TTT

SQUIRREL MONSTER · « **Reply #16 on:** Jan 20, 2006, 10:53:50 PM »

SQUIRREL MONSTER · « **Reply #17 on:** Jan 22, 2006, 06:20:25 PM »

SQUIRREL MONSTER · « **Reply #18 on:** Jan 22, 2006, 08:50:33 PM »

ok new price..... 300 bux for both. need em out of here ASAP! first come first serve basis!

SQUIRREL MONSTER · « **Reply #19 on:** Jan 26, 2006, 08:01:35 PM »

front is gonna be outta here tomorra hopefully. rear is still available. 100 OBO drum to drum.

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

SQUIRREL MONSTER [OP]

Related Topics