Topic: SOLD: 2nd gen runner Trailmaster R. Lift

[johnnygalt]

I have a rear Trailmaster lift kit for a 2nd generation 4runner.  Includes coils, panhard drop brackets, LSPV drop bracket, sway bar drops, 2 Procomp 3000 shocks to match and the instructions.  All hardware is included although a few pieces should be replaced, available at your local hardware store.  Some granite grindage on the lower panhard drops due to a trip through the Rubicon.

$150 OBO + shipping from 95678.

Edit 11/28:  Original bumpstop spacers were not included when I bought the kit so I made some out of 1.5" square tubing stacked together.  I do not recommend using this solution, I would purchase the original spacers from Trailmaster.  However I will include them w/ bolts to fasten them to the spring top hats.

[johnnygalt [OP]]

pic

[Thumper]

Hey what all needs too be replaced thats in the kit?
Is it the 4 inch kit?
put me 1st in line for it and we can talk shipping.
thanks
adam

[johnnygalt [OP]]

Hey what all needs too be replaced thats in the kit?

One of the large bolts(9/16?) on the panhard drop brackets and a couple of the 7/16 x 1" bolts are marginal.  If I was installing in again on my truck I would use lock nuts that have upset threads rather than nylock.  Or red loctite.

The other change I would make is to put a spacer in between the factory lower panhard bracket where the 9/16 bolt threads thru.  Otherwise there is nothing to prevent the factory hanger from being crushed as you tighten the drop bracket.  The ends of the panhards would probably work.  If you want the ends off mine I'll cut them off and include them, I don't need them anymore 

Yes it's the 4" kit.

[johnnygalt [OP]]

Package weighs 72 lbs, shipped from 95678.  Dhl is cheapest from what I've found.

[johnnygalt [OP]]

top