R151F transmission measurements

Started by rocktoy74, November 19, 2005, 10:51:04 AM

0 Members and 1 Guest are viewing this topic.

rocktoy74

Marlin lists most of the popular Toyota transmission measurements on his website. But not the measurements for the R151F Toyota turbo transmission. I would like to know the measurements to see how close the shifters would be to the stock location in a carbed 84' 4runner. Marlin list the following measurements: Overall length, Length from bellhousing to center of transmission shifter, and length from bellhousing to center of transfer case shifter. If anyone out there has a R151F transmission laying around ::) or knows these measurements It would be greatly appreciated. Thanks In advance. Worley :greengrin:     
84' XTRA Cab, 22R, R151, Dual cases W/Marlin Crawler 23 Spline 4.70 Total Spline and 23 spline 2.28 Crawlbox, Alcans, Bilstein 5125's, HP 529, V6 529, HAD Shafts, FROR Full Floater, Old School AllPro Crossmember, Marlin Crawler High Steer, Marlin Crawler Bumpers and Sliders

ccannon222

I"ll get you some measurement tomorrow.  I have one I picked up for my trail rig in the shop.  I also put one in my 85 carbed PU.  If I remember correctly, the overall lenght is within a 1/4 of the G52 that came out.  The shifters lined up almost exactly were my G52 were.

ccannon

rocktoy74

Thanks In advance ccannon! :greengrin: I really do appreciate your time and effort. According to Marlin's website the G52 measurements are: Overall length 25 3/8", Bellhousing to center of transmission shifter 18 7/8", and bellhousing to center of transfer case shifter 23 1/4" Just FYI. Thanks again Worley
84' XTRA Cab, 22R, R151, Dual cases W/Marlin Crawler 23 Spline 4.70 Total Spline and 23 spline 2.28 Crawlbox, Alcans, Bilstein 5125's, HP 529, V6 529, HAD Shafts, FROR Full Floater, Old School AllPro Crossmember, Marlin Crawler High Steer, Marlin Crawler Bumpers and Sliders

Angelo

Hey Bud

I can get those measurements for you tomorrow, we have a couple R151 w/attached T-cases.
I'll see if Dave can post-m, other wise I'll it will be late tomorrow, I've got to put the trans
back in my Dodge so I can make the Hammers Wed.

Angelo
  :turtle:
U S Army Artillery

         "Field Artillery men do it with a BIGGER BANG"
Fired May 4th 2009 by Chris H. Its been an experience..

ccannon222

I did some quick measurements of a R151F and a G52.  R151F:  Overall 25 1/2  Bell to center trans shifter 19 and 23 1/4 bell to t-case shifter.  The measurements are within 1/16 of an inch to the G52.

ccannon

rocktoy74

Thanks to both of you, you have been very helpfu.l Worley :greengrin:
84' XTRA Cab, 22R, R151, Dual cases W/Marlin Crawler 23 Spline 4.70 Total Spline and 23 spline 2.28 Crawlbox, Alcans, Bilstein 5125's, HP 529, V6 529, HAD Shafts, FROR Full Floater, Old School AllPro Crossmember, Marlin Crawler High Steer, Marlin Crawler Bumpers and Sliders