Topic: 85 22re wont idle down,need help fast!!!!

[toynizzy]

well i had a bad t-stat so i went to change it,long story short,both bolts broke and i had to change the intake.so i did and got everything back on no problems.now it wont idle under 1500.i tried timing,adjusting the idle,throttle cable,checked vacume lines and nuthing seems to be wrong.the only thing i can thing of is the throttle sensor on the intake,could it be bad??i need any help i can get bad,if u have any ideas please let me know,thanks alot

[brainlessfool]

vac. leak?

[79coyotefrg]

recheck for vacuum leaks,  get a small propane torch  and open the valve and let the propane escape around the intake if rpms go up you found your leak

[toynizzy [OP]]

i checked for vac leaks with carb cleaner and nuthing,im stumped as of now

[Matt_BC]

IAC messed up? Disconnect battery and IAC, make sure everything connects propery.

Except the vac leak maybe a mehanical problem in the throttle linkage?

Matt

[toynizzy [OP]]

well im thinking its my throttle poss sensor but im going to check everything out on monday,but keep the ideas coming its all usefull to me

[toynizzy [OP]]

well today i went to start working on my truck to find the problem and before i could get it started to start spraying the vac lines one of the injectors started pouring fuel from the rail side,i replaced the intake grommets but they didnt have the o-rings for the injectors,now having found that would that make it idle up that high if it was sucking air?well i hope so,now i ordered them and i hope that fixes me up.if u have any more info on the issue let me know please,thanx
                                                                                              brian

[FATB0Y]

vac. leak?

That's what I was thinkin'

[b_ripper8]

Not necessarily an air leak but a fuel leak would do the same thing. Leaky injectors from O-rings would definently cause a high idle.

[toynizzy [OP]]

well that damn thing is leaking real good,it wasnt leaking friday night when i put it all together,maybe setting all weekend it finished giving out the rest of the way so i hope thats the fix there,thanx to all who gave there input,and if u have more ill take it too lol
                                                                 
                                                                     brian

[TigerToy]

well that damn thing is leaking real good,it wasnt leaking friday night when i put it all together,maybe setting all weekend it finished giving out the rest of the way so i hope thats the fix there,thanx to all who gave there input,and if u have more ill take it too lol
                                                                 
                                                                     brian

When you put the orings on and put them down in the intake be sure to squirt a little (just a smidge) wd-40 on them to help them seal up and slide in easily.

[FATB0Y]

When you put the orings on and put them down in the intake be sure to squirt a little (just a smidge) wd-40 on them to help them seal up and slide in easily.

vasoline also works good.

[toynizzy [OP]]

yea i was told to use gas but wd or a but of vasoline will prob be what i use,i hope that this is gonna fix that damn thing,i miss my toy everyday lol.thankx to all who gave it some thought and tried to help me out,i really appriciate it


                                                                     brian

[Prismo]

I use silicone di-electric grease on mine, seems to work well.

[brainlessfool]

KY is the 

[b_ripper8]

A good rule of thumb is to lubricate with whatever fluid it's going to be touching.