Topic: new head

[dirtman]

so i need to get some head work done and decided to go with engnbldr's rv head (bigger valves etc). my question is do i need to do anything with my rocker assembly, dont want to put a vlave into a piston. And should i upgrade my cam?? not sure of the difference it will make. any opinions would be helpful as i have never sone this before.

[79coyotefrg]

so i need to get some head work done and decided to go with engnbldr's rv head (bigger valves etc). my question is do i need to do anything with my rocker assembly, dont want to put a vlave into a piston. And should i upgrade my cam?? not sure of the difference it will make. any opinions would be helpful as i have never sone this before.

if you want more useable power on the freeway ,like in traffic,  get a street performer cam from LCengineering,  low end will not suffer and you'll actually have power to pass somebody,
 otherwise just use the cam you have if its not damaged

[79coyotefrg]

as for your rockers,  make sure the adjusters arent damaged or the wear pads worn unusually,   new cam warrranties require the use of new rockers  but thats not always financialy feasable