Author Topic: Hubs (Read 2403 times)

POWERSTROKEN · « **on:** Oct 14, 2005, 10:24:04 AM »

What is the difference if any between toy solid axle hubs and IFS hubs? Thanks. Jim

POWERSTROKEN · « **Reply #1 on:** Oct 14, 2005, 10:28:38 AM »

I have a solid front axle widening kit which will now use IFS hubs and a rear full floater kit that uses the solid axle front hub parts. Would be nice if 1 hub fit all.

crawlerdan · « **Reply #2 on:** Oct 14, 2005, 10:30:40 AM »

got pics of the rear? and why not do the widening kit in the raer also, so you can use the same hubs?

POWERSTROKEN · « **Reply #3 on:** Oct 14, 2005, 11:25:41 AM »

I am running an 85 solid axle front and an IFS rear I was trying to keep them the same track width.

crawlerdan · « **Reply #4 on:** Oct 14, 2005, 11:27:08 AM »

ah...i see...wheel spacers?

79coyotefrg · « **Reply #5 on:** Oct 14, 2005, 06:06:47 PM »

Quote from: POWERSTROKEN on Oct 14, 2005, 10:28:38 AM

I have a solid front axle widening kit which will now use IFS hubs and a rear full floater kit that uses the solid axle front hub parts. Would be nice if 1 hub fit all.

ifs lockouts are slightly smaller shaft diameter and a 27 spline count if i recall, the solid axle lockouts are 30spline both lockouts will bolt to either "hub" but the axle shafts themselves are the difference

79coyotefrg · « **Reply #6 on:** Oct 14, 2005, 06:07:22 PM »

you will want solid axle lockouts for front and rear

POWERSTROKEN · « **Reply #7 on:** Nov 02, 2005, 11:32:46 PM »

Thanks Man.

Author Topic: Hubs (Read 2403 times)

POWERSTROKEN

Hubs

POWERSTROKEN [OP]

Re: Hubs

crawlerdan

Re: Hubs

POWERSTROKEN [OP]

Re: Hubs

crawlerdan

Re: Hubs

79coyotefrg

Re: Hubs

79coyotefrg

Re: Hubs

POWERSTROKEN [OP]

Re: Hubs

Related Topics


	Author Topic: Hubs (Read 2403 times) 0 Members and 1 Guest are viewing this topic. POWERSTROKEN Rock Master Turtle Points: -1 Posts: 256 Member since Sep '05 Crawling with Marlin Hubs « on: Oct 14, 2005, 10:24:04 AM » What is the difference if any between toy solid axle hubs and IFS hubs? Thanks. Jim Logged "Don't RAM it...STROKE it" POWERSTROKEN [OP] Rock Master Turtle Points: -1 Posts: 256 Member since Sep '05 Crawling with Marlin Re: Hubs « Reply #1 on: Oct 14, 2005, 10:28:38 AM » I have a solid front axle widening kit which will now use IFS hubs and a rear full floater kit that uses the solid axle front hub parts. Would be nice if 1 hub fit all. Logged "Don't RAM it...STROKE it" crawlerdan Gold Turtle Award Turtle Points: 1319 Posts: 4,770 Member since Feb '05 Re: Hubs « Reply #2 on: Oct 14, 2005, 10:30:40 AM » got pics of the rear? and why not do the widening kit in the raer also, so you can use the same hubs? Logged POWERSTROKEN [OP] Rock Master Turtle Points: -1 Posts: 256 Member since Sep '05 Crawling with Marlin Re: Hubs « Reply #3 on: Oct 14, 2005, 11:25:41 AM » I am running an 85 solid axle front and an IFS rear I was trying to keep them the same track width. Logged "Don't RAM it...STROKE it" crawlerdan Gold Turtle Award Turtle Points: 1319 Posts: 4,770 Member since Feb '05 Re: Hubs « Reply #4 on: Oct 14, 2005, 11:27:08 AM » ah...i see...wheel spacers? Logged 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Hubs « Reply #5 on: Oct 14, 2005, 06:06:47 PM » Quote from: POWERSTROKEN on Oct 14, 2005, 10:28:38 AM I have a solid front axle widening kit which will now use IFS hubs and a rear full floater kit that uses the solid axle front hub parts. Would be nice if 1 hub fit all. ifs lockouts are slightly smaller shaft diameter and a 27 spline count if i recall, the solid axle lockouts are 30spline both lockouts will bolt to either "hub" but the axle shafts themselves are the difference Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Hubs « Reply #6 on: Oct 14, 2005, 06:07:22 PM » you will want solid axle lockouts for front and rear Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way POWERSTROKEN [OP] Rock Master Turtle Points: -1 Posts: 256 Member since Sep '05 Crawling with Marlin Re: Hubs « Reply #7 on: Nov 02, 2005, 11:32:46 PM » Thanks Man. Logged "Don't RAM it...STROKE it"