Topic: CHEAP!!!!! to a good home

[gbanci01gv]

I have a 1986 1 ton 2wd pickup I need to get rid of.  I started a SAS with stock front springs and the all-pro hanger kit.  I also rebuilt the knukles and purchased the high-crossover steering kit.  The springs and front differential are mounted and I started to do the steering.  I Had a 86 4runner I scavanged parts from, so I was mounting that steering box and going to use the 4x4 trans from it. Also i used the 4runner rear end with the stock springs and 2 inch lift blocks to level the truck.  I used all-pro ubolt flip kits for the front and rear.  I have extended brake lines and the calipers for the 4runner to use on the front axle.  I also purcahsed the front vented rotors from Marlin's.  It has an awsome diamond plate flat bed that I built.

Basically this truck is 75% finished.  I need to get rid of it as I have moved and don't have room for it.  Just make me an offer and come get it.  All of the parts I purchased have not been used just installed or still in the boxes.  The truck has a clean NJ title and does run.  I will not part it out as I need to get rid of it ASAP.  Thanks Please Email me with questions.

[ensmyers]

I am in CT, how cheap are you talking?  I have a trailer and could come and get it.  Please let me know.

[gbanci01gv [OP]]

I'm located in Sussex NJ, its in the northern part. I'm looking to get around $500.00 for the truck and all the parts I can find for it.  You can contact me on my cell 973 670 9441 or email georgeb@naspco.com during the week before 4:00pm and morganmg1980@msn.com anytime after that.

[79coyotefrg]

i'd love to have that 1 ton rear axle

[unclejpl4x4]

NJ thats my naborhood  wish i had the room     IF my mom came home and saw that

[yoter]

Would you want to sell the crossover steering? Or some more of your SAS parts?

[jimbo74]

i'd love to have that 1 ton rear axle

glen, why?

[unclejpl4x4]

U guys know this post is like 4 months old right

[yotatilla]

If the reviver had even bothered to look, the starter of this thread hasnt logged onto the board since the end of October, around the end of this thread. Honestly.


 


Sam