Author Topic: Toyota SBC slick fit headers (Read 8710 times)

Spider · « **on:** Sep 26, 2005, 06:29:18 PM »

Looking for a set of reasonably priced slick fit headers for my SBC in my toyota...

Prices pm'd or posted shipped to 97038

Thanks!

Ed

dj · « **Reply #1 on:** Sep 30, 2005, 07:40:17 AM »

I used a set of flowtech blochuggers, they work good and only cost 90$ new

Spider · « **Reply #2 on:** Oct 05, 2005, 10:34:14 PM »

Quote from: dj on Sep 30, 2005, 07:40:17 AM

I used a set of flowtech blochuggers, they work good and only cost 90$ new

Did you have a problem with the headers hitting the frame on the passenger side? Were you using solid motor mounts? Are the block huggers center dump? Details man! Details...

toyrolet · « **Reply #3 on:** Oct 05, 2005, 11:59:53 PM »

yah i just stuck a set of truck manifolds like ram horn style and would really like to run headers instead.

dj · « **Reply #4 on:** Oct 07, 2005, 09:38:49 AM »

yeah they are center dump did not hit anything I made my motor mounts they are 100% bolt in onto the original yota mounts, I will try to post you some pics.

Spider · « **Reply #5 on:** Oct 07, 2005, 12:02:33 PM »

Quote from: dj on Oct 07, 2005, 09:38:49 AM

yeah they are center dump did not hit anything I made my motor mounts they are 100% bolt in onto the original yota mounts, I will try to post you some pics.

Pics would be great! I had a problem with som center dump headers a while ago. I think it was the driver side that dumped right into the motor mount. What year of motor are you using?

Thanks for the info!

dj · « **Reply #6 on:** Oct 10, 2005, 09:07:36 AM »

Quote from: Spider on Oct 07, 2005, 12:02:33 PM

Pics would be great! I had a problem with som center dump headers a while ago. I think it was the driver side that dumped right into the motor mount. What year of motor are you using?

Thanks for the info!

94 5.7 (350) yeah if you buy motor mounts you will have to modify them to run center dumps, but is a lot cheaper. Still working on pics

Spider · « **Reply #7 on:** Oct 10, 2005, 08:38:08 PM »

I am using the Downey style bolt on to factory 4cyl mounts. Are you using the weld on style?

Spider · « **Reply #8 on:** Nov 04, 2005, 12:54:16 AM »

giddee up!

dj · « **Reply #9 on:** Nov 04, 2005, 09:35:19 AM »

I made my mounts, but I have a set of NWOR bolt ups

Spider · « **Reply #10 on:** Nov 04, 2005, 02:11:48 PM »

Quote from: dj on Nov 04, 2005, 09:35:19 AM

I made my mounts, but I have a set of NWOR bolt ups

Any chance I can get a pic of your passenger side mounts and header arrangement.

dj · « **Reply #11 on:** Nov 07, 2005, 07:25:31 AM »

Yeah I will post you some pics just as soon as I get time

Spider · « **Reply #12 on:** Nov 08, 2005, 05:43:26 PM »

You lead the same life I do then!

Thanks!

dj · « **Reply #13 on:** Nov 09, 2005, 07:26:34 AM »

sorry I still have not had a chance to post the pics

vxrich · « **Reply #14 on:** Nov 10, 2005, 12:25:44 AM »

I have a set of AA slick fits I would never buy these again they need the rear primary rewelded as it cracked all the way around on bolth headers But if you want them 35 bux and ship them to you.

Spider · « **Reply #15 on:** Nov 12, 2005, 10:41:49 AM »

Quote from: vxrich on Nov 10, 2005, 12:25:44 AM

I have a set of AA slick fits I would never buy these again they need the rear primary rewelded as it cracked all the way around on bolth headers But if you want them 35 bux and ship them to you.

Did you run flex joints at all, or just hard pipe them in. Everyone I know is running flex joints and hasn't had a problem yet.

I'm pretty sure its a feasible repair otherwise you wouldn't be trying to sell them. But do you have any pics so I can see what I'm getting into.

$35 sounds good is that shipped or + S/H. Whats your paypal addy? My zip is 97038

vxrich · « **Reply #16 on:** Nov 12, 2005, 12:50:54 PM »

I didnt run flex joints that could have been the problem but my ext is all rubber mounts with a decent amount of movment.I will try to get some pics to days leave me your email and ill send them there.Im not shure if repair will be worth your time ill let you decide.yes 35 shipped.

Spider · « **Reply #17 on:** Nov 12, 2005, 01:27:26 PM »

You can email me at: Spider77usa@yahoo.com

Thanks!

vxrich · « **Reply #18 on:** Nov 12, 2005, 05:53:11 PM »

Im trying to get pics but my phone wont send to my email for some reason but Im working on it

vxrich · « **Reply #19 on:** Nov 13, 2005, 06:58:05 PM »

I will try and get pics tuesday I can use a cammera

Spider · « **Reply #20 on:** Nov 13, 2005, 11:10:54 PM »

Cool! Thanks!!

vxrich · « **Reply #21 on:** Nov 16, 2005, 10:02:09 PM »

Looks like Im not going to be able to get pics The rear primary tubes on boolth headers will need to be re welded and possibly the front primarys too I never had much luck getting them to not leak...

Spider · « **Reply #22 on:** Nov 16, 2005, 10:21:26 PM »

Sounds fine, I have a small wirefeed also. Shoot me your paypal addy, I'll kick the money your way!

Thanks

Ed

vxrich · « **Reply #23 on:** Nov 17, 2005, 06:40:01 PM »

Its VXRICH@HOTMAIL.COM

Spider · « **Reply #24 on:** Nov 17, 2005, 11:33:18 PM »

paypal is doing maintenance at the current moment. I will send the funds friday.

Spider · « **Reply #25 on:** Nov 18, 2005, 09:38:16 AM »

paypal sent!

Thanks

Redneckmudder · « **Reply #26 on:** Jan 07, 2013, 08:28:38 PM »

I am doing the same thing i gor a 85 4x4 toyota and i just droped a 94 5.7 and tryin to find a set of headers my problem has been on the driver side hittin the frame i have bought my motor mounts from Summit Racing. Hoping to find Pictures if any one can post.

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Spider [OP]

Related Topics