GOT NEW TIRES!!! Tire on the truck pics

Started by UNBREAKABLE, August 18, 2005, 04:35:43 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

UNBREAKABLE

August 18, 2005, 04:35:43 PM Last Edit: August 21, 2005, 01:20:29 PM by UNBREAKABLE
Pit-Bull Rockers
39.50x16.50x16.50
That's how I roll

UNBREAKABLE

#1
August 18, 2005, 04:36:19 PM
sweet
That's how I roll

Hyena

#2
August 18, 2005, 04:41:47 PM
On hummer beadlocks?  Now you gotta mount them on the truck and take pictures!

CTENG in KS

#3
August 18, 2005, 04:48:50 PM
on the truck...on the truck...on the truck...!   :shocking:
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

whiteman

#4
August 18, 2005, 04:55:47 PM
Do it..... :yesnod:           Those tires look cool. how do they perform.

AlaskaToy

#5
August 18, 2005, 04:57:26 PM
sweet!  Now post up actual height/width measurements, along with air pressure and rim width (8.5" I'm assuming).  I am considering a set myself for 17" wheels, but I'm waivering becuase my wheels are only 9.5" wide and the Manf says 11" min.
1-ton Toy

crawlerdan

#6
August 18, 2005, 05:00:19 PM
is be groovin those badboys!! :disturbed:

CTENG in KS

#7
August 18, 2005, 05:02:57 PM
Humer rims have to be the baddest ass looking rims on earth
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

UNBREAKABLE

#8
August 18, 2005, 05:09:59 PM
oh yeah on hummer beadlocks....I am in the process of a build-up right now. I started fresh for my '92 x-cab. I started with a new frame for it, cut ALL the b/s off of it, cleaned it inside and out and sandblasted back down to bare metal. I will do a build-up thread on it after I make substantial progress. I am taking pics every step of the way
That's how I roll

UNBREAKABLE

#9
August 18, 2005, 05:11:09 PM Last Edit: August 18, 2005, 05:56:28 PM by UNBREAKABLE
I was mistaken


I can't mount them on a truck...well I might be able to stick them on the truck for a quik pik tomorrow,( I haven't pulled the axles yet)


Oh they measure w/20psi----16" wide and 39" tall

Oh and the tread is just a little over 3/4 deep
That's how I roll

AlaskaToy

#10
August 18, 2005, 05:35:56 PM
Quote from: UNBREAKABLE on August 18, 2005, 05:11:09 PM
No H1 beadlocks are 9 3/4 wide

Say wah????   Are you sure about that?  I was under the distinct impression they are 8.5" wide.  Please school me.
1-ton Toy

UNBREAKABLE

#11
August 18, 2005, 05:48:14 PM Last Edit: August 18, 2005, 05:56:43 PM by UNBREAKABLE
let me go check....I was thinking that they are 9 3/4
That's how I roll

UNBREAKABLE

#12
August 18, 2005, 05:59:02 PM
I was wrong...they are 8.25!  I think I'll have mine widend to 10 or 11" wide
That's how I roll

AlaskaToy

#13
August 18, 2005, 06:04:12 PM Last Edit: August 18, 2005, 06:09:50 PM by AlaskaToy
Quote from: UNBREAKABLE on August 18, 2005, 05:59:02 PM
I was wrong...they are 8.25! 

I thought I was losing it.  (I was still off by .25")  THanks.

Quote from: UNBREAKABLE on August 18, 2005, 05:59:02 PM
I think I'll have mine widend to 10 or 11" wide

Holy crow!  For what? That would cost a lot, no?   you already have tires on them.  If they run well, then just press on!
1-ton Toy

UNBREAKABLE

#14
August 18, 2005, 06:13:51 PM
I am running a 16" tire on a 8.25 wheel...It wouldn't be too much
That's how I roll

mr4x42u

#15
August 18, 2005, 11:39:21 PM
I've seen them in action,,they look like they do very well in the goo,trails and snow....have yet to see them in the rocks,,but from what I've seen they kick ass..hit the rocks and report.. :usa:
Forgiveness is between them and god..
Its my job to arrange the meeting!

UNBREAKABLE

#16
August 19, 2005, 02:08:22 PM
I will as soon as I get a truck w/ 8 lug 1.25 ton axles done.   Right now all I have is a frame.
That's how I roll

UNBREAKABLE

#17
August 21, 2005, 01:17:47 PM
1
That's how I roll

UNBREAKABLE

#18
August 21, 2005, 01:19:51 PM
 :ladys-man:
That's how I roll

crawlerdan

#19
August 21, 2005, 01:26:11 PM
ooo, perty rims!!

UNBREAKABLE

#20
August 21, 2005, 01:33:05 PM
oh yeah, they will be when they go to the powdercoat man. I'm going to have the lock ring done the same color as my truck and the wheels will match my front/rear bumper, roof rack, and frame. I know that it is a whole lota $$$ for a trail/rock rig but damn it'll look good for a couple of days. My frame won't be touched though, belly pan biotch!
That's how I roll

UNBREAKABLE

#21
August 21, 2005, 01:35:16 PM
Oh I'm gonna repaint the cab and bed before it's all done. I have to start and finish the bed work after I get the axles, engine and tranny's mounted up....it'll be bobbed and dovetailed.
That's how I roll

RHG

#22
August 21, 2005, 01:38:22 PM
Is there going to be enough room to stuf thosebig guys in there? Looks like the front bumber might be in the way a bit. Time to bust out the plasma
Only the dead have seen the end of war - Plato

89 Ext Cab Long Bed, SAS'd, Double 2.28's, 5.29's, 38" TSL's, Allied Beadlocks, Half Doors, Custom Trail Bodywork

UNBREAKABLE

#23
August 21, 2005, 05:30:29 PM
I am rebuilding this truck on a totally new frame. Ground up build-up.
That's how I roll

KWP

#24
August 21, 2005, 05:36:00 PM
Bad a$$ man. How much did they set you back?
88 Toyota truck ( Under Construction ) Dana 60's front and rear 5.38's, welded diffs, 3inch Downey rears up front,one link rear with aerostar coils rolling on 39.5x16.50/17 Pittbull Rockers and 17x9 Pro Comp extreme alloys.http://board.marlincrawler.com/index.php?topic=40816.0

UNBREAKABLE

#25
August 21, 2005, 05:40:02 PM
Umm, I'm not quite sure yet. I am working out something with guy
That's how I roll

gotrocks

#26
August 21, 2005, 05:44:15 PM
I like it!!  I have to tell you that you gave me inspiration to start my build.  I wasn't sold on the 1 tons until I saw your rig.  Keep the the good work man.  I just started my build up and can't wait to see things go together.
Print
Go Up Pages1
User actions