0 Members and 1 Guest are viewing this topic.
Sounds like your cold start injector isn't working properly, check connection, you can also pull out of intake a make sure fuel is coming out at cold start
Rather than the cold start injector (if my first post isn't the problem) it would probably be the cold start injector timerhttp://board.marlincrawler.com/index.php?topic=50178.msg626655#msg626655
I havent gotten around to any more testing yet (house hunting is keeping me busy).But been doing research.I looked at your photobucket. I figured i would just clean the brass post, but I see you seperated the entire sensor. I don't wanna break it on accident. Would you tell me how you seperated the sensor to get at the internals? I am envisioning myself pulling/twisting or something and then cracking the plastic plug.
Been awhile...........I used some combination of screwdrivers, small chisels, needle nose pliers and a dremel to uncrimp it.
Started by Rebeltilldeath3 General 4WD Discussion
Started by superyota Engine
Started by superyota Parts Wanted
Started by trailcrawler Toyota Pickup/4Runner Tech 1979-95
Started by Plowking Toyota Pickup/4Runner Tech 1979-95