Author Topic: L52 identification (Read 1842 times)

RCKSQRL · « **on:** Feb 12, 2014, 06:51:25 AM »

May have missed it and if so sorry...

Know a place that has a bunch of toyota transmissions laying around, working on getting a '81 and would like to upgrade it to the L52 or at least have it as a back up. Length will get me the L series over the G/W, but is there a easy way to identify the 52 over the 50 and earlier?
(Not a transmission guy so use small words please!)

thanks in advance!

79coyotefrg · « **Reply #1 on:** Feb 13, 2014, 05:51:02 PM »

here is the input bearing number for the L52 -- B32-14UR, 32BC08S1N

the L50 input bearing is -- 63/32N, 032-2

you have to remove the input bearing retainer and put an

on the bearing itself

RCKSQRL · « **Reply #2 on:** Feb 13, 2014, 05:52:12 PM »

Thank you sir!

Sent from magic wish granting phone

Author Topic: L52 identification (Read 1842 times)

RCKSQRL

L52 identification

79coyotefrg

Re: L52 identification

RCKSQRL [OP]

Re: L52 identification

Related Topics


	Author Topic: L52 identification (Read 1842 times) 0 Members and 1 Guest are viewing this topic. RCKSQRL Crawler Guru Turtle Points: 1 Posts: 588 Member since Oct '02 Viva La Yota! L52 identification « on: Feb 12, 2014, 06:51:25 AM » May have missed it and if so sorry... Know a place that has a bunch of toyota transmissions laying around, working on getting a '81 and would like to upgrade it to the L52 or at least have it as a back up. Length will get me the L series over the G/W, but is there a easy way to identify the 52 over the 50 and earlier? (Not a transmission guy so use small words please!) thanks in advance! Logged '85 EFI Runner 4.3 with 700R4- for sale 5.29 detroit F/R Front 3 Link with air shocks rear 4 Link Custom Fuel cell 8274 Crawler #719, rear with 4.70 # 677, Twin stick Skys manufacturing T-case crossmember 6 point cage modified with harness bar, dash bar and PRP seats mounted to cage 2 feet chopped off the back It seems it is never done........ in works for new body and exo, motor and trans swap... 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: L52 identification « Reply #1 on: Feb 13, 2014, 05:51:02 PM » here is the input bearing number for the L52 -- B32-14UR, 32BC08S1N the L50 input bearing is -- 63/32N, 032-2 you have to remove the input bearing retainer and put an on the bearing itself Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way RCKSQRL [OP] Crawler Guru Turtle Points: 1 Posts: 588 Member since Oct '02 Viva La Yota! Re: L52 identification « Reply #2 on: Feb 13, 2014, 05:52:12 PM » Thank you sir! Sent from magic wish granting phone Logged 79coyotefrg likes this '85 EFI Runner 4.3 with 700R4- for sale 5.29 detroit F/R Front 3 Link with air shocks rear 4 Link Custom Fuel cell 8274 Crawler #719, rear with 4.70 # 677, Twin stick Skys manufacturing T-case crossmember 6 point cage modified with harness bar, dash bar and PRP seats mounted to cage 2 feet chopped off the back It seems it is never done........ in works for new body and exo, motor and trans swap...