Topic: 2" wheel spacers with 4" bs rims?

[91 ex-cab]

I'm looking at running 2" spacers on a yota front axle with 4" backspaced rims. Tires will be 35's, so i'm looking for opinions on if this will put to much stress on the bearings? I don't think it would be to big of a deal, but it would be on a dd so maybe it will

[Rocksnail]

Do it till you get new rims. I for one don't like spacers over one inch. But people seam top get away with it all the time. heck theres a guy by my house that has 3 inch on all corners. and he DD every day

[88_Pathy]

I run 2in spacers and 3.75 BS wheels with no issues.  The scrub radius is not the best, but it works just fine.

[Squeebs]

I'm running 31x10.50 on 15" 3 3/4" back space wheels.

Stock IFS suspension, 1994.

The tire/wheel combo didn't rub at full lock, and when i threw on 1.5" spacers my uncle gave me, they rubbed real bad. Had to take a BFH to the pinch welds. Fine now.

[Volcom]

I run 1.5" spacers with 15"x10" 2.5" backspaced wheels.  The scrub radius sucks.  The width is nice.  It's hard on all the frontend parts.  Trunion bearings hate it for sure.

[Sparkplug]

Yeah, your wheel bearings and trunion bearings are gonna hate you. Wide is stable, but so is a balanced rig, that sits low. And low doesnt hurt parts.