Anyone running poly motor mounts like the rockstomper ones on a DD? or know someone who is? my mounts are starting to
the bed. I took a very short pry bar maybe 10" and pryed on the mounts and had the engine rockin around like a stripper shaking her ass for dollar bills. I have been hearing a little rattle under my feet when jamming on the skinny pedal. I just want to know what all the hype is all about with the extra vibration. i do not have dual cases but, I do have 5.29's open F/R and do allot of towing. ( landscape trailer with mowers and sometimes firewood 6'x10' trailer ) I have seen the chain and bolt mods for the mounts dunno if i wanna go that route.
Had another snag my lspv seems to have also
the bed sooo looking to put a prop valve under the hood anyone running one of these?
http://www.summitracing.com/parts/WIL-260-8419/T line up front behind right front wheel block return line, delete lspv behind gas tank and hard line it back to Master cylinder? is it that simple?
found a nice write up on pirate about getting rid of the stock lspv by OOPS seems pretty cut and dry. i have seen people say take the valve out hard line it and never look back, before you post that remember I tow and live where its very icy and snowy for 4+ months a year.
