Author Topic: SM420 W/ OTT Ind. 0 clearance adapter (Read 2685 times)

crazykooter · « **on:** Feb 12, 2010, 01:23:55 PM »

SM420 with a OTT Ind. 0 clearance adapter. This adapter is for Chevy 350 to Toyota transfer cases. Pretty rare adapter. 600.00
These SM420's have output shaft changed to make it compatible for Toy T cases.
I am located in Byron, Ca which is just outside brentwood,ca

mudmaster · « **Reply #1 on:** Feb 12, 2010, 03:33:50 PM »

Will this also work with a 4.3/SM 465 combo?

HDcruiser · « **Reply #2 on:** Feb 12, 2010, 04:41:33 PM »

Fyi... the SM420 is a bomber trans!!! i used to have one in my jeep.. first gear ratio is 7.05 to 1

joblo · « **Reply #3 on:** Feb 13, 2010, 01:10:22 AM »

not to mention it will shorten your powertrain length by what like 2 ft...

toyoder · « **Reply #4 on:** Feb 13, 2010, 08:19:42 PM »

is this a 21 or 23 spline output ?

crazykooter · « **Reply #5 on:** Feb 14, 2010, 10:07:02 AM »

It is a 21 spine output. It will bolt up bolt up to any small block chevy. vortecs including 4.3 and I believe even 454s.

Author Topic: SM420 W/ OTT Ind. 0 clearance adapter (Read 2685 times)

crazykooter

SM420 W/ OTT Ind. 0 clearance adapter

mudmaster

Re: SM420 W/ OTT Ind. 0 clearance adapter

HDcruiser

Re: SM420 W/ OTT Ind. 0 clearance adapter

joblo

Re: SM420 W/ OTT Ind. 0 clearance adapter

toyoder

Re: SM420 W/ OTT Ind. 0 clearance adapter

crazykooter [OP]

Re: SM420 W/ OTT Ind. 0 clearance adapter

Related Topics


	Author Topic: SM420 W/ OTT Ind. 0 clearance adapter (Read 2685 times) 0 Members and 1 Guest are viewing this topic. crazykooter Trade Count: (0) The 1K Club Turtle Points: -369 Posts: 1,418 Member since Apr '09 Located in Byron, CA SM420 W/ OTT Ind. 0 clearance adapter « on: Feb 12, 2010, 01:23:55 PM » SM420 with a OTT Ind. 0 clearance adapter. This adapter is for Chevy 350 to Toyota transfer cases. Pretty rare adapter. 600.00 These SM420's have output shaft changed to make it compatible for Toy T cases. I am located in Byron, Ca which is just outside brentwood,ca Report to moderator Logged http://board.marlincrawler.com/index.php?topic=61015.0 mudmaster Trade Count: (+2) The 2.5K Group Turtle Points: 3715 Posts: 2,854 Member since Feb '05 Re: SM420 W/ OTT Ind. 0 clearance adapter « Reply #1 on: Feb 12, 2010, 03:33:50 PM » Will this also work with a 4.3/SM 465 combo? Report to moderator Logged Time to go wheelin! HDcruiser Trade Count: (+1) Crawler Guru Turtle Points: 10 Posts: 580 Member since Dec '06 Re: SM420 W/ OTT Ind. 0 clearance adapter « Reply #2 on: Feb 12, 2010, 04:41:33 PM » Fyi... the SM420 is a bomber trans!!! i used to have one in my jeep.. first gear ratio is 7.05 to 1 Report to moderator Logged joblo Trade Count: (0) Rock Master Turtle Points: 1 Posts: 199 Member since Sep '09 R.O.K.O.---S.O.A.S. Re: SM420 W/ OTT Ind. 0 clearance adapter « Reply #3 on: Feb 13, 2010, 01:10:22 AM » not to mention it will shorten your powertrain length by what like 2 ft... Report to moderator Logged R.O.K.O.---S.O.A.S. toyoder Trade Count: (0) Crawler Guru Turtle Points: 211 Posts: 704 Member since May '04 Crawling with Marlin Re: SM420 W/ OTT Ind. 0 clearance adapter « Reply #4 on: Feb 13, 2010, 08:19:42 PM » is this a 21 or 23 spline output ? Report to moderator Logged zuk tube buggy 22re powered crazykooter [OP] Trade Count: (0) The 1K Club Turtle Points: -369 Posts: 1,418 Member since Apr '09 Located in Byron, CA Re: SM420 W/ OTT Ind. 0 clearance adapter « Reply #5 on: Feb 14, 2010, 10:07:02 AM » It is a 21 spine output. It will bolt up bolt up to any small block chevy. vortecs including 4.3 and I believe even 454s. Report to moderator Logged http://board.marlincrawler.com/index.php?topic=61015.0