I recently started building my cage. I'll be working from rear to front and finishing parts as I go. I tacked everything on so I know it fit, I then removed it and welded slowly so to minimize warping. I then painted and masked off the parts I need to weld later.
After some though I decided to make a new tailgate, that ties into the exo. I am going to start with the bottom tube and make some spring loaded pins.
I made some pin recievers for the exo and some spring loaded pins for the gate.
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Insert1.jpg)
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Insert2.jpg)
Excuse the grease, on the pins.
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Insert25.jpg)
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Insert3.jpg)
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Insert45.jpg)
And the bottom tube done.
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Rear2.jpg)
Rear from the side.
![](http://i203.photobucket.com/albums/aa116/4runnerchevy/Exo%20Cage/Rear1.jpg)
More to come, as I finish the tailgate and move towards the front. In case your wondering about the Top, my truck is bobbed so the fiberglass top is gone. I have a custom top from Kayline and a wife who sews.