Author Topic: what needed to do a rear disc's? (Read 1394 times)

Mike D · « **on:** Oct 05, 2004, 02:38:46 PM »

87 rear axle just wondering what i need to do it.

toyhatsu · « **Reply #1 on:** Oct 05, 2004, 08:00:57 PM »

Here is a pic of some home made brackets. If you want the full size drawings let me know or you can find it on Pirate. I have some Sky ones with Chevy rotors with the centers turned and `85 Monte Carlo calipers with the emergency brake and an in cab lever proportioning valve. Need some brake lines. I can't put them on though as the truck is at the garage for an engine conversion. There is a lot of information about this on Pirate if you do a search.

toyhatsu · « **Reply #2 on:** Oct 05, 2004, 08:10:41 PM »

oh...a picture of Sky Manufacturing's set up.

Mike D · « **Reply #3 on:** Oct 05, 2004, 08:21:19 PM »

just checked out the one from sky that looks like a good easy set up so i might aswell go with that and it not to expensive either 8)

Author Topic: what needed to do a rear disc's? (Read 1394 times)

Mike D

what needed to do a rear disc's?

toyhatsu

Re: what needed to do a rear disc's?

toyhatsu

Re: what needed to do a rear disc's?

Mike D [OP]

Re: what needed to do a rear disc's?

Related Topics


	Author Topic: what needed to do a rear disc's? (Read 1394 times) 0 Members and 1 Guest are viewing this topic. Mike D The 1.5K Club Turtle Points: 122 Posts: 1,902 Member since Jun '04 MMMMMMMMMM........ what needed to do a rear disc's? « on: Oct 05, 2004, 02:38:46 PM » 87 rear axle just wondering what i need to do it. Logged 87 runner, 4" trailmaster lift, 33" TSL/SX, 5.29's V6 e-locker, 22re that cost too much toyhatsu Rock Master Turtle Points: 302 Posts: 201 Member since May '04 Toyota owns 51% of Daihatsu Motor Co, Ltd. Re: what needed to do a rear disc's? « Reply #1 on: Oct 05, 2004, 08:00:57 PM » Here is a pic of some home made brackets. If you want the full size drawings let me know or you can find it on Pirate. I have some Sky ones with Chevy rotors with the centers turned and `85 Monte Carlo calipers with the emergency brake and an in cab lever proportioning valve. Need some brake lines. I can't put them on though as the truck is at the garage for an engine conversion. There is a lot of information about this on Pirate if you do a search. disc_brackets.JPG (31.93 kB, 700x516 - viewed 121 times.) Logged 1991 Daihatsu Rocky, 3RZ-fe, Marlin super heavey duty clutch and pressure plate, Marlin W56-C-HD, duals, Marlin twinstick, three link front with Fox AirShox, 35's, Toy axles, 5.29:1, ARB F&R etc. toyhatsu Rock Master Turtle Points: 302 Posts: 201 Member since May '04 Toyota owns 51% of Daihatsu Motor Co, Ltd. Re: what needed to do a rear disc's? « Reply #2 on: Oct 05, 2004, 08:10:41 PM » oh...a picture of Sky Manufacturing's set up. sky_diskbrakesinstalledpic.JPG (39.27 kB, 400x430 - viewed 113 times.) Logged 1991 Daihatsu Rocky, 3RZ-fe, Marlin super heavey duty clutch and pressure plate, Marlin W56-C-HD, duals, Marlin twinstick, three link front with Fox AirShox, 35's, Toy axles, 5.29:1, ARB F&R etc. Mike D [OP] The 1.5K Club Turtle Points: 122 Posts: 1,902 Member since Jun '04 MMMMMMMMMM........ Re: what needed to do a rear disc's? « Reply #3 on: Oct 05, 2004, 08:21:19 PM » just checked out the one from sky that looks like a good easy set up so i might aswell go with that and it not to expensive either 8) Logged 87 runner, 4" trailmaster lift, 33" TSL/SX, 5.29's V6 e-locker, 22re that cost too much