Author Topic: driveline angle shims (Read 1656 times)

LOckEdSolidTOy · « **on:** Apr 19, 2008, 07:49:30 PM »

I am thinking of ordering shims from 4crawler that go inbetween the axle and leaf pack to help correct my drivline angles. i have marlin 4" springs in rear and yj springs up front, all have 5.5"shackles. I was wondering if any of you have used shims with around this much lift and what degree you used. thank you for any input

Hammerhead · « **Reply #1 on:** Apr 19, 2008, 09:09:33 PM »

I don't like the shims since I've seen them spit out before. It's best to weld your perches on at the right angle instead.

Are you running a CV shaft or standard?

79coyotefrg · « **Reply #2 on:** Apr 20, 2008, 10:26:38 AM »

get steel shims and weld them on

KYOTA · « **Reply #3 on:** Apr 20, 2008, 10:28:58 AM »

Hawt new setup to correct shaft angles

http://portland.craigslist.org/wsc/pts/641398213.html

DTB · « **Reply #4 on:** Apr 20, 2008, 10:45:14 AM »

Thats a new one to me! IS that a Fontucky Fab set up?

KYOTA · « **Reply #5 on:** Apr 20, 2008, 11:16:37 AM »

saw it on local CL when I was searching parts

Rockcrawlintoy · « **Reply #6 on:** Apr 20, 2008, 11:31:48 AM »

Quote from: DirToyBoy on Apr 20, 2008, 10:45:14 AM

Thats a new one to me! IS that a Fontucky Fab set up?

when in doubt copy jeeps

LOckEdSolidTOy · « **Reply #7 on:** Apr 20, 2008, 07:22:20 PM »

i have a standard driveline, and i can order steel ones that weld on so i will get those, but what angle should i get anybody else have a marlin, allpro, trailgear set up with the 4" springs

Author Topic: driveline angle shims (Read 1656 times)

LOckEdSolidTOy

driveline angle shims

Hammerhead

Re: driveline angle shims

79coyotefrg

Re: driveline angle shims

KYOTA

Re: driveline angle shims

DTB

Re: driveline angle shims

KYOTA

Re: driveline angle shims

Rockcrawlintoy

Re: driveline angle shims

LOckEdSolidTOy [OP]

Re: driveline angle shims

Related Topics


	Author Topic: driveline angle shims (Read 1656 times) 0 Members and 1 Guest are viewing this topic. LOckEdSolidTOy Rock Crawl'n Turtle Points: -1 Posts: 24 Member since Mar '08 driveline angle shims « on: Apr 19, 2008, 07:49:30 PM » I am thinking of ordering shims from 4crawler that go inbetween the axle and leaf pack to help correct my drivline angles. i have marlin 4" springs in rear and yj springs up front, all have 5.5"shackles. I was wondering if any of you have used shims with around this much lift and what degree you used. thank you for any input Logged Nor Cal, just livin it & keepin it real Hammerhead Crawler Guru Turtle Points: 100 Posts: 564 Member since Nov '04 Junkyard Dog Re: driveline angle shims « Reply #1 on: Apr 19, 2008, 09:09:33 PM » I don't like the shims since I've seen them spit out before. It's best to weld your perches on at the right angle instead. Are you running a CV shaft or standard? Logged '82 pickup, +3, locked, doubled '82 pickup, IFS long travel, V8 '85 4runner, V8 rock crawler '88 X-cab, V6 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: driveline angle shims « Reply #2 on: Apr 20, 2008, 10:26:38 AM » get steel shims and weld them on Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way KYOTA Gold Turtle Award Turtle Points: 1759 Posts: 4,824 Member since Jan '04 Wreckin Ball '09 Re: driveline angle shims « Reply #3 on: Apr 20, 2008, 10:28:58 AM » Hawt new setup to correct shaft angles http://portland.craigslist.org/wsc/pts/641398213.html Logged My 83 Buildup DTB Shoutbox Moderator Gold Turtle Award Turtle Points: 2 Posts: 7,110 Member since Nov '05 Squirrels and beer don't mix Re: driveline angle shims « Reply #4 on: Apr 20, 2008, 10:45:14 AM » Thats a new one to me! IS that a Fontucky Fab set up? Logged RIP KYOTA Quote toyminator2000 – There has to be dumb people in order for there to be smart people Low down & durrrrrrty Rock Stacking Web Wheeler Too many Yuppies.....Not enough Hippies Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco KYOTA Gold Turtle Award Turtle Points: 1759 Posts: 4,824 Member since Jan '04 Wreckin Ball '09 Re: driveline angle shims « Reply #5 on: Apr 20, 2008, 11:16:37 AM » saw it on local CL when I was searching parts Logged My 83 Buildup Rockcrawlintoy 4 doors for more whores The 2K Group Turtle Points: 2147 Posts: 2,339 Member since Dec '03 RIP Kyle Re: driveline angle shims « Reply #6 on: Apr 20, 2008, 11:31:48 AM » Quote from: DirToyBoy on Apr 20, 2008, 10:45:14 AM Thats a new one to me! IS that a Fontucky Fab set up? when in doubt copy jeeps Logged Resident Jeep Guy 2007 JKU All Stock ECV 7-11 LOckEdSolidTOy [OP] Rock Crawl'n Turtle Points: -1 Posts: 24 Member since Mar '08 Re: driveline angle shims « Reply #7 on: Apr 20, 2008, 07:22:20 PM » i have a standard driveline, and i can order steel ones that weld on so i will get those, but what angle should i get anybody else have a marlin, allpro, trailgear set up with the 4" springs Logged Nor Cal, just livin it & keepin it real