Author Topic: 87 Toy SAS (Read 2644 times)

b_ripper8 · « **on:** Jul 08, 2004, 01:19:39 PM »

I have an 87 toy reg cab short bed that I am currently swapping axles with an 85. All the parts are here just waiting for a welder. Will be running 5.29 Yukon's front and back (welded rear), marlin's highsteer arms, sas hanger kit, and probably ranger leafs. I'm getting the dual case adapter from a friend and need another t-case soon. Also am considering coverting to EFI since my engine is pulled and being rebuilt. Still haven't resolved what to do about the gas tank/fuel pump issue. Already have access to all other EFi components. Suggestions?

WHITE_TRASH · « **Reply #1 on:** Jul 08, 2004, 03:21:43 PM »

mid 80's to mid 90's fords used a external pump that ran at 39 psi whild the stock toy pump for efi ran at 38 so its a very good matchup.

84runner · « **Reply #2 on:** Jul 08, 2004, 06:36:34 PM »

Sounds like a fun project lets see some pics

And what about a wrecking yard for the EFI tank ? Or a tow yard , they like to part cars out that are going to the junk yard to make some more cash

b_ripper8 · « **Reply #3 on:** Jul 08, 2004, 06:58:05 PM »

Is that Ford's in general or F-150's, Escorts...anything? I'm assuming it has to come off an efi equiped ford aswell.

WHITE_TRASH · « **Reply #4 on:** Jul 08, 2004, 11:42:58 PM »

fullsize passenger cars and pickups.

b_ripper8 · « **Reply #5 on:** Jul 10, 2004, 12:01:44 AM »

Thanks for the help, I'll keep my eyes open for one.

b_ripper8 · « **Reply #6 on:** Jul 15, 2004, 12:03:23 AM »

Removed the rear drivelive and 3rd member and started setting up the Yukon 5.29s and am pulling off the front suspenion now. Unfortunatly I found out I don't have a 220 outlet in my house for the welder so I may have to get it on a flatbed to a freinds house to complete it.

WHITE_TRASH · « **Reply #7 on:** Jul 15, 2004, 12:13:56 AM »

You have a dryer dont you? If so it has to plug into something

b_ripper8 · « **Reply #8 on:** Jul 15, 2004, 12:18:22 AM »

gas dryers don't need 220

WHITE_TRASH · « **Reply #9 on:** Jul 15, 2004, 12:19:58 AM »

Drats foiled again! Well it was worth a shot.

84runner · « **Reply #10 on:** Jul 15, 2004, 09:33:45 AM »

Well all you need is 20 12volt batterys

But on a more serious note

Author Topic: 87 Toy SAS (Read 2644 times)

b_ripper8

87 Toy SAS

WHITE_TRASH

Re: 87 Toy SAS

84runner

Re: 87 Toy SAS

b_ripper8 [OP]

Re: 87 Toy SAS

WHITE_TRASH

Re: 87 Toy SAS

b_ripper8 [OP]

Re: 87 Toy SAS

b_ripper8 [OP]

Re: 87 Toy SAS

WHITE_TRASH

Re: 87 Toy SAS

b_ripper8 [OP]

Re: 87 Toy SAS

WHITE_TRASH

Re: 87 Toy SAS

84runner

Re: 87 Toy SAS


	Author Topic: 87 Toy SAS (Read 2644 times) 0 Members and 1 Guest are viewing this topic. b_ripper8 Rock Master Turtle Points: 371 Posts: 275 Member since May '04 3RZ-FE power is that much closer. 87 Toy SAS « on: Jul 08, 2004, 01:19:39 PM » I have an 87 toy reg cab short bed that I am currently swapping axles with an 85. All the parts are here just waiting for a welder. Will be running 5.29 Yukon's front and back (welded rear), marlin's highsteer arms, sas hanger kit, and probably ranger leafs. I'm getting the dual case adapter from a friend and need another t-case soon. Also am considering coverting to EFI since my engine is pulled and being rebuilt. Still haven't resolved what to do about the gas tank/fuel pump issue. Already have access to all other EFi components. Suggestions? Logged In Progress: 3RZ-FE Swap Underway. Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion WHITE_TRASH Gold Turtle Award Turtle Points: 679 Posts: 6,277 Member since Feb '03 Don't blame me, I didn't vote for this crap. Re: 87 Toy SAS « Reply #1 on: Jul 08, 2004, 03:21:43 PM » mid 80's to mid 90's fords used a external pump that ran at 39 psi whild the stock toy pump for efi ran at 38 so its a very good matchup. Logged Full hydro, 186:1 with an auto and 44's what could go wrong?? 84runner The 2.5K Group Turtle Points: 99 Posts: 2,797 Member since Dec '02 Re: 87 Toy SAS « Reply #2 on: Jul 08, 2004, 06:36:34 PM » Sounds like a fun project lets see some pics And what about a wrecking yard for the EFI tank ? Or a tow yard , they like to part cars out that are going to the junk yard to make some more cash Logged RUBICON TESTED BIG BALLS APPROVED b_ripper8 [OP] Rock Master Turtle Points: 371 Posts: 275 Member since May '04 3RZ-FE power is that much closer. Re: 87 Toy SAS « Reply #3 on: Jul 08, 2004, 06:58:05 PM » Is that Ford's in general or F-150's, Escorts...anything? I'm assuming it has to come off an efi equiped ford aswell. Logged In Progress: 3RZ-FE Swap Underway. Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion WHITE_TRASH Gold Turtle Award Turtle Points: 679 Posts: 6,277 Member since Feb '03 Don't blame me, I didn't vote for this crap. Re: 87 Toy SAS « Reply #4 on: Jul 08, 2004, 11:42:58 PM » fullsize passenger cars and pickups. Logged Full hydro, 186:1 with an auto and 44's what could go wrong?? b_ripper8 [OP] Rock Master Turtle Points: 371 Posts: 275 Member since May '04 3RZ-FE power is that much closer. Re: 87 Toy SAS « Reply #5 on: Jul 10, 2004, 12:01:44 AM » Thanks for the help, I'll keep my eyes open for one. Logged In Progress: 3RZ-FE Swap Underway. Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion b_ripper8 [OP] Rock Master Turtle Points: 371 Posts: 275 Member since May '04 3RZ-FE power is that much closer. Re: 87 Toy SAS « Reply #6 on: Jul 15, 2004, 12:03:23 AM » Removed the rear drivelive and 3rd member and started setting up the Yukon 5.29s and am pulling off the front suspenion now. Unfortunatly I found out I don't have a 220 outlet in my house for the welder so I may have to get it on a flatbed to a freinds house to complete it. Logged In Progress: 3RZ-FE Swap Underway. Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion WHITE_TRASH Gold Turtle Award Turtle Points: 679 Posts: 6,277 Member since Feb '03 Don't blame me, I didn't vote for this crap. Re: 87 Toy SAS « Reply #7 on: Jul 15, 2004, 12:13:56 AM » You have a dryer dont you? If so it has to plug into something Logged Full hydro, 186:1 with an auto and 44's what could go wrong?? b_ripper8 [OP] Rock Master Turtle Points: 371 Posts: 275 Member since May '04 3RZ-FE power is that much closer. Re: 87 Toy SAS « Reply #8 on: Jul 15, 2004, 12:18:22 AM » gas dryers don't need 220 Logged In Progress: 3RZ-FE Swap Underway. Currently: 87' 4Runner - SAS - 5.29's - welded rear - Dual 2.28 cases - Optima bluetop - round headlight conversion - FZJ80 grill - rattlecan paint job - trimmed fenders - Ranger hybrid springs front - Tacoma hybrid springs rear - schedule 160 drivelines 8" slip front - Marlin's crossmember - disk brake conversion WHITE_TRASH Gold Turtle Award Turtle Points: 679 Posts: 6,277 Member since Feb '03 Don't blame me, I didn't vote for this crap. Re: 87 Toy SAS « Reply #9 on: Jul 15, 2004, 12:19:58 AM » Drats foiled again! Well it was worth a shot. Logged Full hydro, 186:1 with an auto and 44's what could go wrong?? 84runner The 2.5K Group Turtle Points: 99 Posts: 2,797 Member since Dec '02 Re: 87 Toy SAS « Reply #10 on: Jul 15, 2004, 09:33:45 AM » Well all you need is 20 12volt batterys But on a more serious note Logged RUBICON TESTED BIG BALLS APPROVED