Author Topic: need (Read 2426 times)

REG535 · « **on:** Mar 19, 2008, 11:23:44 AM »

I need a W-56 or G-54 along with the t-case, bellhousing, and shifters, and pedal assembly all in good working order for my auto to manual conversion.
So if anyone can help it would be appeciated for this summer project.
Am also looking for new marker lights if anyone knows where to get them complete with wiring as my wiring fell off $I\'m Down$
My toyota is an 85xcab. I live in torrington, wyoming right now, just for college purporses, but my toyota is in Cortez, Colorado. So the parts would have to be sent to colorado until i get my toyota up here.
Am also looking for 85 vented doors thanks.

79coyotefrg · « **Reply #1 on:** Mar 19, 2008, 11:28:02 AM »

my crystal ball is broken so how about letting us know where you are

toyotaboy · « **Reply #2 on:** Mar 19, 2008, 11:33:04 AM »

yea my ball aint workin either

yota_krawler · « **Reply #3 on:** Mar 19, 2008, 12:52:35 PM »

85 pick ups and runners didnt come with vented rotors either

MiniSimp · « **Reply #4 on:** Mar 19, 2008, 03:02:22 PM »

http://board.marlincrawler.com/index.php?topic=39620.0;highlight=practically+anything+you+want

yota_krawler · « **Reply #5 on:** Mar 19, 2008, 03:04:17 PM »

oh my bad I read it wrong!

82rustbeast · « **Reply #6 on:** Mar 21, 2008, 06:55:40 PM »

I have a pair of 87 vented window doors from a 2WD, they should work. Theyre grey and the paint is very nice.

Im in California though. $75 not including shipping

REG535 · « **Reply #7 on:** Mar 21, 2008, 07:22:15 PM »

am not sure, it sounds like good doors though, i wonder if matters if they are 2wd i would think so but not sure, umm, pics? do they roll up and down well?

82rustbeast · « **Reply #8 on:** Mar 21, 2008, 07:26:54 PM »

They roll up and down just fine, but the door panels are pretty bad. Oh yeah, one of the windows has a small letter etched into the glass (Stupid kids in Auto Shop) and one lock is missing, sorry if they sound bad now.

REG535 · « **Reply #9 on:** Mar 21, 2008, 07:30:00 PM »

i wonder if the locks are interchangalbe? i have some on the ones that are on there now, i could swap it and put it in maybe or get a new one.
They still seem kool. just wondering if you have any pics?
also what lights did use for your undercarriage? and is it street legal or just for offroad?

boggerunner · « **Reply #10 on:** Mar 21, 2008, 08:13:43 PM »

all the doors will swap from 84-88 trucks and 84 - 89 4runners 2 and 4wd. and the locks will also interchange. and u can also put the wing windows in non wing doors too. i have a set of wing window doors up here in grand junction, co

REG535 · « **Reply #11 on:** Mar 21, 2008, 08:18:19 PM »

oh i didnt know that lol, how much shippied to 81321 82rustbeast? am in cortez, co, so do you have any pics of your doors boogerunner?

boggerunner · « **Reply #12 on:** Mar 21, 2008, 08:27:23 PM »

the doors are all dented up, and im gonna cut them up for half doors, but i would sell the glass, wing, and regulator for your doors

82rustbeast · « **Reply #13 on:** Mar 22, 2008, 08:31:31 PM »

I put down that together the doors weigh 100 lbs. and UPS ground shipping might be around $80.

I dont know how much these doors weigh for sure though. I can check when I go back to school on Monday.

82rustbeast · « **Reply #14 on:** Mar 22, 2008, 08:58:36 PM »

Oh yeah, I try to get pics on monday.

About my rock lights, they are just rectangular 55W or 100W

fog lights. So the beam is close and wide. What I did is I took out the rear mounting bolts on each side of my bench seat, expanded the hole and stuck the fog light bolt through there, then I adjusted the lights to point as close to the truck as possible but the frame stopped them where they are now.

I dont know if its street legal or not, sometimes I'll switch them on when Im cruising around and none of the cops that I pass stop me. My friends tell me that they look like ricer mobile neons, but theyre cool anyways.

REG535 · « **Reply #15 on:** Mar 22, 2008, 10:11:28 PM »

thats kool just let me know on the doors ok, and pics ya that would be nice. take care

82rustbeast · « **Reply #16 on:** Mar 27, 2008, 06:43:31 PM »

oh I m sorry I posted the pics of the doors on my sale thread and not on this one, here they are.

REG535 · « **Reply #17 on:** Mar 27, 2008, 06:53:00 PM »

They look sweet! i want them, maybe if i can afford it hehe. How much is shipping you said 80? can u check and see for sure thats how much it would be.
The zip code again is 81321, COrtez, CO.
They look in good shape like you said expect for the stuff the kids did haha.
Well hopefully i can take them off your hands. Let me know. THanks for the pics too.

82rustbeast · « **Reply #18 on:** Mar 27, 2008, 06:55:58 PM »

I will check shipping tomorrow morning at a local UPS, and will let you know the price as soon as possible.

REG535 · « **Reply #19 on:** Mar 27, 2008, 06:59:26 PM »

Ok thanks bro

82rustbeast · « **Reply #20 on:** Mar 28, 2008, 06:04:48 PM »

wow, Im sorry about this. I called UPS and got a pretty outragous price at about $240 to ship the doors. Im sorry about that. Let me know about what you want to do.

The $80 quote was through the UPS website, and I guess it just wasnt right.

Im sure it isnt really worth it, you could probably find some good doors around you area for way cheaper.

REG535 · « **Reply #21 on:** Mar 28, 2008, 07:07:22 PM »

that is outrageous

and that sucks, i was hoping to get some doors. THanks for getting back to me. Hopefully i can find some in my area. again thanks for your time.

79coyotefrg · « **Reply #22 on:** Mar 29, 2008, 10:59:57 AM »

Quote from: ToxicToy on Mar 19, 2008, 02:59:53 PM

vented rotors? uh? i am talking about vented doors lol, as far as where am at, cortez, co, 81321

change your subject in the original; post to tell people what you need and where you are

REG535 [OP]

REG535 [OP]

REG535 [OP]

REG535 [OP]

REG535 [OP]

REG535 [OP]

REG535 [OP]