Author Topic: 1st Gen. Parts in TX.  (Read 1564 times)

0 Members and 1 Guest are viewing this topic.

CE_TX

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
1st Gen. Parts in TX.
« on: Apr 25, 2008, 02:44:28 PM »
Just acquired 2 1st gen 4x4 trucks for parts. I'm using one of the frames, a motor and t-cases for my Formula Four buggy build. The rest is going to be sold.

Here is a small list of stuff that I know I have for sure to sell at the moment. I will update as I start dismantling the 2 trucks.

1 set of axles 300.00.

1 set of springs F&R 50.00.

2 L series 5spd trannies, both shift good through the gears and both have shifters. 150.00 each.

1 Power Steering box with steering shaft. 100.00 each

1 Trans/T-case stock crossmember, excellent condition. 75.00

1 pr of stock bucket seats in fair condition. 50.00 for the pair.

4 doors (2 sets), both complete with wing windows-good condition. 20.00 each.

1 Hood in good condition. 50.00

1 Driver's side fender in good condition. 25.00

1 82 model cab 98% rust free with title.  Comes with windshield, dash, steering column and sliding rear window.  Asking 250.00 OBO.





All prices are plus shipping. I will ship the heavy stuff (axles, trans) if you arrange the shipping. I can get them on a pallet then dropped off at a local freight company for no extra charge, you will only pay for the freight to get them to you.

I'm in Longview, Texas 75605.

Eric
bruiser2870@yahoo.com
« Last Edit: May 02, 2008, 02:26:37 PM by CE_TX »

toyotajunkie89

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Male Posts: 70
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #1 on: Apr 25, 2008, 03:30:42 PM »
i need to shifters for the t/case gear drive. /c clips/floor boots/and the floor steel plates.
   i live in OR. 97132   how much    shipped.

TheCookieMonster

  • Trade Count: (0)
  • Offline 4WD Legend
  • *****
  • Turtle Points: 0
  • Male Posts: 973
  • Member since Dec '07
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #2 on: Apr 25, 2008, 03:39:52 PM »
you got any round style headlights :dunno:

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #3 on: Apr 25, 2008, 04:37:17 PM »
i need to shifters for the t/case gear drive. /c clips/floor boots/and the floor steel plates.
   i live in OR. 97132   how much    shipped.

What exactly are the floor steel plates? 

Both boots are torn and I'm keeping the shifters.

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #4 on: Apr 25, 2008, 04:37:55 PM »
you got any round style headlights :dunno:

Sorry, both trucks have square headlights.

snowshoebrue

  • Trade Count: (0)
  • Offline The 1K Club
  • *
  • Turtle Points: 447
  • Male Posts: 1,152
  • Member since Jun '05
  • Crawling with Marlin
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #5 on: Apr 25, 2008, 05:10:50 PM »
are the headlight trims chrome and do they have the blinker lenses?

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #6 on: Apr 26, 2008, 07:32:03 PM »
are the headlight trims chrome and do they have the blinker lenses?

Neither truck has any of that stuff on them. 

crazyinsain

  • Trade Count: (0)
  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Posts: 7
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #7 on: Apr 26, 2008, 09:20:59 PM »
do you have some good shape tail lights?
how much a pair?

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #8 on: Apr 27, 2008, 01:20:37 PM »
do you have some good shape tail lights?
how much a pair?

Just looked at both trucks and only one has them, but both have cracks in them.

83beater5

  • Trade Count: (0)
  • Offline Dusty Trails
  • *
  • Turtle Points: 0
  • Male Posts: 3
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #9 on: Apr 27, 2008, 04:25:18 PM »
hey i live in longview too    wanted to see if i could stop buy and look at the seats

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #10 on: Apr 27, 2008, 05:45:14 PM »
hey i live in longview too    wanted to see if i could stop buy and look at the seats

Sure, I will send you a PM with my number.

Eric

TheCookieMonster

  • Trade Count: (0)
  • Offline 4WD Legend
  • *****
  • Turtle Points: 0
  • Male Posts: 973
  • Member since Dec '07
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #11 on: Apr 28, 2008, 09:33:43 AM »
Sorry, both trucks have square headlights.

thanks anyway  :thumbs:

Glen1978

  • Trade Count: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 261
  • Member since Dec '05
  • Crawling with Marlin
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #12 on: Apr 28, 2008, 04:57:32 PM »
You aint got :pokinit: man!   :ack:

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #13 on: Apr 28, 2008, 05:27:07 PM »
You aint got :pokinit: man!   :ack:

Tell me about it!  I even tried to get rid of the tan one today at the local scrap yard and they wouldn't take it.  Said any car/truck that gets unloaded in their yard has to have a title with it.  That is some crazy :pokinit: right there.

Glen1978

  • Trade Count: (0)
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 261
  • Member since Dec '05
  • Crawling with Marlin
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #14 on: Apr 28, 2008, 08:58:32 PM »
You have to cut them up in pieces.  I been down that road before. 

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #15 on: Apr 29, 2008, 11:55:15 AM »
Added some stuff at the top. :biggthumpup:

CE_TX [OP]

  • Trade Count: (0)
  • Offline Rock Crawl'n
  • **
  • Turtle Points: 2
  • Posts: 61
  • Member since Apr '08
    • View Profile
Re: 1st Gen. Parts in TX.
« Reply #16 on: May 02, 2008, 02:27:09 PM »
Added 82 cab in 1st post. :thumbs:

 
 
 
 
 

Related Topics

35 Replies
12323 Views
Last post Oct 22, 2004, 06:58:06 AM
by WHITE_TRASH
0 Replies
1230 Views
Last post Mar 11, 2005, 07:37:03 AM
by madmax21tm
23 Replies
9942 Views
Last post Jun 01, 2005, 06:37:19 PM
by AzBearFan
51 Replies
12094 Views
Last post Jul 25, 2007, 07:41:31 PM
by LAGEN WAGON
1 Replies
2269 Views
Last post Jul 29, 2007, 12:27:20 PM
by insane04