Topic: tranny problems

[blyle84]

Alright so i got a 87 4runner and it originally had a auto and i swaped it out with a manual and and now the clutch is not fully disengaging, i put a brand new clutch and slave cylinder as well as a new clutch disc pressure plate throw out bearing.  It seems like theres not enough throw in the slave cylinder. Are there different slave or clutch cylinders that would cause that? I really don't know what else it could be, any help would be much appreciated. Thanks Brandon

[Joey88RUNR]

you need to bleed the system after replacing the slave cyl...it takes time..doesnt bleed very easy....mine didnt

[blyle84 [OP]]

ya i did that a couple of times i made sure there was no air in there. I was also thinking maybe i got the wrong pressure plate like the 1600 lbs instead of the 1200 lbs but idk would that really matter?

[79coyotefrg]

what brand clutch??  you may need to adjust the pedal linkage

[blyle84 [OP]]

its the marlin kit, i'll check out  the linkage