Topic: replacement 22rte turbos?

[indica4r]

anyone know where to get them? or any other bolt on?

[79coyotefrg]

DO NOT  use a stock CT20  they are junk,  get a garret T3/T4 from LCEngineering  or  find a supra in a junk yard and grab the turbo,  should bolt right up and builds alot more boost 

[yotaweelr]

I have 2 of them available. 500 each.

[indica4r [OP]]

if i were to get a different turbo would i have to re-tune or would the stock ecu adjust for more boost?

[79coyotefrg]

i think it would tune itself, if not you could richen the mix by adjusting the maf

[kneedownnate]

I have 2 of them available. 500 each.

You can ebay a supra ct26 for way cheaper. 

[yotaweelr]

ct 20s bolt right in with no mods and are made for the power band of the 22re. I know one of them is a new factory replacement with maybe 5k on it. the other is off a truck with a bad lower end. I wish you could find bolt in replacements that easy when i needed one for my friends runner. but he went with a tec turbo, with 2.5" mandrel bent exhaust, and just recentley had a motor built, balanced and cammed. I would go withthe tec turbo setup if it were my own, you don't normally get the, pushing into the back of the seat, feeling with any other 22rte truck that you get with his.

[kneedownnate]

Yes, ct20 bolts right up since that's what they came with, but they are absolute junk!  The ct26 is the way to go. 

[rexandfx]

yes, take it from someone thats owned more than 1 of these, the ct20 is a waste of money, it has too small of a turbine, and it has an insane amount of back pressure. get either the ct26 from the old supras, or get the t3/t4 hybrid. for a cheaper amount of money too.

just be ready to make up some flanges and lines, and what-not.

the ct 26 Is NOT a direct bolt on, it requires an adapter plate, for moounting the turbo to the manifold, it is just a tead too small, youll need to loosen and turn the intake housing to where your water cooling, and oil cooling lines are accesible, and fabricate up a oil drain feed line, I think it comes out of the wrong side, but not a huge ordeal. anyways, it's worth it by far.

[indica4r [OP]]

can someone point me to a link that explains how to adjust the afm.