Topic: transmission shifter linkage

[toymachine]

my brother lost the linkage that connects the transmission shifter to the slave cylinder on a 79' transmiission.

does anyone have one, or can take measurements and a pic so we can make one.  We'd appreciate it

thanks

[yotaboy79]

how does the shifter connect to the slave cylender? the shifter connects to the tranny and the slave cylender conects to the shift fork and a hydrolic line
or atleast thats the way mine was 

[mudmaster]

my brother lost the linkage that connects the transmission shifter to the slave cylinder on a 79' transmiission.

does anyone have one, or can take measurements and a pic so we can make one. We'd appreciate it

thanks

Uh yeah

[toymachine [OP]]

     My bad, you're right, that doesn't make much sense now that i think about it.  My brother usually doesn't know what he's talking about.  Let me clear this up a little.  Would have been easier bcause i found one at the yard, and didn't take a close look at it, and the next day it was gone.

So, on say my 83 transmission, the shifter goes right into the top of the transmission and that's it.  On the older model the shifter goes down the pass. side of the tranny and supposedly has a linkage of somekind or something which actually shifts through th side of the tranny.  My dad and brother said there is a slave cylinder looking thing there, seperate from the clutch slave cylinder.

Does anyone know what i am talking about.  Or can someone just take a good pic of that area if you have this transmission.

Sorry about the nonsense

[Ferg]

Early (79-80) models had side shifters, L43 trans.  He's looking for the piece that goes between the shifter and the side cover.

Try this  http://www.pirate4x4.com/forum/showthread.php?t=366842  whole trans for $100.00

[yotaboy79]

ill take a pick of the L43 i just pulled out that hasnt been sent back to marlin yet

[yotaboy79]

ok here ya go just tell me which part you need

[toymachine [OP]]

Right on dudes...i (and my bro)  appreciate the help.  I am having him check out the pics to see what he needs, then i will let you know what piece it is.  You have some spares lying around you could get rid of for cheap. 

[yotaboy79]

i most likely have what you need considering ive killed 4 of those trannys and have a few "extra pieses" laying around

[toymachine [OP]]

Here is the part he needs exactly.  The whole thing fell off.  He needs the little housing and the plunger deal as well.



PM me how much you want for it.  Can i paypal you or something.  Thanks man

[toymachine [OP]]

So does anyone have the metal plunger piece?   I can get the little metal housing but not the plunger. 

[toymachine [OP]]

yotaboy, you still around?  I only need the metal elbow, not the plunger i guess.  So we'll take it.  I sent you a pm.  Later

jake

[yotaboy79]

pm'd ya back