Author Topic: gone thanks 22r, Needs something, don't know what. SoCal (Read 1778 times)

EarlKann · « **on:** Mar 08, 2008, 08:56:03 PM »

*GONE* thanks for the add Marlin.

82 or 83 vintage. Suddenly stopped running for the previous owner. I tried to get it started while it was still in the truck, but it wouldn't run. Turned over freely and even sounded like it wanted to run, but wouldn't fire. I took the valve cover off and didn't see any damage to the valve train. No water in the oil.

Tried to compression test it and got between 35-45psi in all 4 cylinders.

Don't know what's wrong. Head gasket? Bad rings in ALL the cylinders? Who knows, selling as a rebuildable core.

What you see is what you get. PS pump, AC compressor, intake manifold. I have an exhaust manifold also, but it has a broke off bolt for the air tube that will need to be drilled/extracted. No carb or distributor.

$80
Pick it up in Riverside SoCal.

79coyotefrg · « **Reply #1 on:** Mar 09, 2008, 10:46:18 AM »

i'll almost garantee the timing chain jumped a tooth or two and smashed the valves, bending them a tiny bit, this caused the extremely lo compression

buckeye1437 · « **Reply #2 on:** Mar 09, 2008, 12:30:07 PM »

will you sell the tvsv valve it bolts to the head next to the intake has 3 vac lines going to it

EarlKann · « **Reply #3 on:** Mar 10, 2008, 07:36:16 AM »

Quote from: buckeye1437 on Mar 09, 2008, 12:30:07 PM

will you sell the tvsv valve it bolts to the head next to the intake has 3 vac lines going to it

In the back? The thing with the gold pipe coming off it?
Sure, I guess if you need it I could take it off. What's it worth to you?

buckeye1437 · « **Reply #4 on:** Mar 10, 2008, 12:13:34 PM »

no look at the 2nd pic see were you mount the carb now look straight to the head see the brass valve were 3 vaccum lines go i need it i will pay you 20 bucks shiped to 94558

yota18 · « **Reply #5 on:** Mar 10, 2008, 12:36:17 PM »

do you have the exhaust manifold and how much to 94585

buckeye1437 · « **Reply #6 on:** Mar 10, 2008, 05:07:51 PM »

yota18 i have a manifold if you wont it

EarlKann · « **Reply #7 on:** Mar 10, 2008, 08:11:47 PM »

This thing was cracked. Not totally broken, but cracked. I suppose that's why you are looking for one.

EarlKann · « **Reply #8 on:** Mar 10, 2008, 08:15:02 PM »

Exhaust manifold. There is a bolt broken off in one of the air tube mounts. The threads are still ok, bolt needs to be drilled and easy-out'ed / extracted.

$40 shipped

Author Topic: gone thanks 22r, Needs something, don't know what. SoCal (Read 1778 times)

EarlKann

gone thanks 22r, Needs something, don't know what. SoCal

79coyotefrg

Re: 22r, Needs something, don't know what. SoCal

buckeye1437

Re: 22r, Needs something, don't know what. SoCal

EarlKann [OP]

Re: 22r, Needs something, don't know what. SoCal

buckeye1437

Re: 22r, Needs something, don't know what. SoCal

yota18

Re: 22r, Needs something, don't know what. SoCal

buckeye1437

Re: 22r, Needs something, don't know what. SoCal

EarlKann [OP]

Re: 22r, Needs something, don't know what. SoCal

EarlKann [OP]

Re: 22r, Needs something, don't know what. SoCal

Related Topics


	Author Topic: gone thanks 22r, Needs something, don't know what. SoCal (Read 1778 times) 0 Members and 1 Guest are viewing this topic. EarlKann Trade Count: (0) 4WD Legend Turtle Points: 160 Posts: 787 Member since Oct '05 gone thanks 22r, Needs something, don't know what. SoCal « on: Mar 08, 2008, 08:56:03 PM » GONE thanks for the add Marlin. 82 or 83 vintage. Suddenly stopped running for the previous owner. I tried to get it started while it was still in the truck, but it wouldn't run. Turned over freely and even sounded like it wanted to run, but wouldn't fire. I took the valve cover off and didn't see any damage to the valve train. No water in the oil. Tried to compression test it and got between 35-45psi in all 4 cylinders. Don't know what's wrong. Head gasket? Bad rings in ALL the cylinders? Who knows, selling as a rebuildable core. What you see is what you get. PS pump, AC compressor, intake manifold. I have an exhaust manifold also, but it has a broke off bolt for the air tube that will need to be drilled/extracted. No carb or distributor. $80 Pick it up in Riverside SoCal. « Last Edit: Mar 16, 2008, 09:36:36 PM by EarlKann » Report to moderator Logged 79coyotefrg Rock Ninja Trade Count: (0) Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: 22r, Needs something, don't know what. SoCal « Reply #1 on: Mar 09, 2008, 10:46:18 AM » i'll almost garantee the timing chain jumped a tooth or two and smashed the valves, bending them a tiny bit, this caused the extremely lo compression Report to moderator Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way buckeye1437 Trade Count: (0) Rock Crawl'n Turtle Points: -1 Posts: 99 Member since Nov '07 Re: 22r, Needs something, don't know what. SoCal « Reply #2 on: Mar 09, 2008, 12:30:07 PM » will you sell the tvsv valve it bolts to the head next to the intake has 3 vac lines going to it Report to moderator Logged EarlKann [OP] Trade Count: (0) 4WD Legend Turtle Points: 160 Posts: 787 Member since Oct '05 Re: 22r, Needs something, don't know what. SoCal « Reply #3 on: Mar 10, 2008, 07:36:16 AM » Quote from: buckeye1437 on Mar 09, 2008, 12:30:07 PM will you sell the tvsv valve it bolts to the head next to the intake has 3 vac lines going to it In the back? The thing with the gold pipe coming off it? Sure, I guess if you need it I could take it off. What's it worth to you? Report to moderator Logged buckeye1437 Trade Count: (0) Rock Crawl'n Turtle Points: -1 Posts: 99 Member since Nov '07 Re: 22r, Needs something, don't know what. SoCal « Reply #4 on: Mar 10, 2008, 12:13:34 PM » no look at the 2nd pic see were you mount the carb now look straight to the head see the brass valve were 3 vaccum lines go i need it i will pay you 20 bucks shiped to 94558 Report to moderator Logged yota18 Trade Count: (0) Crawler Guru Turtle Points: -61 Posts: 448 Member since Sep '07 Re: 22r, Needs something, don't know what. SoCal « Reply #5 on: Mar 10, 2008, 12:36:17 PM » do you have the exhaust manifold and how much to 94585 Report to moderator Logged buckeye1437 Trade Count: (0) Rock Crawl'n Turtle Points: -1 Posts: 99 Member since Nov '07 Re: 22r, Needs something, don't know what. SoCal « Reply #6 on: Mar 10, 2008, 05:07:51 PM » yota18 i have a manifold if you wont it Report to moderator Logged EarlKann [OP] Trade Count: (0) 4WD Legend Turtle Points: 160 Posts: 787 Member since Oct '05 Re: 22r, Needs something, don't know what. SoCal « Reply #7 on: Mar 10, 2008, 08:11:47 PM » This thing was cracked. Not totally broken, but cracked. I suppose that's why you are looking for one. parts.jpg (13.69 kB, 561x273 - viewed 78 times.) parts2.jpg (9.74 kB, 571x296 - viewed 83 times.) Report to moderator Logged EarlKann [OP] Trade Count: (0) 4WD Legend Turtle Points: 160 Posts: 787 Member since Oct '05 Re: 22r, Needs something, don't know what. SoCal « Reply #8 on: Mar 10, 2008, 08:15:02 PM » Exhaust manifold. There is a bolt broken off in one of the air tube mounts. The threads are still ok, bolt needs to be drilled and easy-out'ed / extracted. $40 shipped IMG_0997.JPG (44.81 kB, 568x426 - viewed 90 times.) IMG_0998.JPG (50.75 kB, 568x426 - viewed 77 times.) IMG_0999.JPG (48.04 kB, 568x426 - viewed 77 times.) IMG_1000.JPG (44.31 kB, 568x426 - viewed 87 times.) Report to moderator Logged